F80 Fire Safety Procedures 3

Question 1

What is the primary purpose of a fire watch?

Accepted Answer

To monitor an area when fire protection systems are impaired

Answer

A fire watch is required when automatic fire suppression or detection systems are out of service, providing continuous human monitoring.

Question 2

Which fuel scenario represents a Class K fire hazard?

Accepted Answer

Hot cooking oil in a commercial fryer

Answer

Class K fires involve cooking oils and fats in commercial cooking equipment and require wet chemical suppression agents.

Question 3

How often must fire drills be conducted in most US office buildings under NFPA 101?

Accepted Answer

Once per year minimum

Answer

NFPA 101 (Life Safety Code) generally requires at least one fire drill per year for business occupancies.

Question 4

What does a flashing red light on a smoke detector most commonly indicate?

Accepted Answer

Normal standby operation

Answer

Most modern smoke detectors flash a red LED every 30–60 seconds during normal standby to show they are functioning.

Question 5

In a healthcare facility, which fire response strategy is used instead of full evacuation?

Accepted Answer

Defend-in-place (shelter-in-place)

Answer

Healthcare facilities use defend-in-place because moving bedridden patients during a fire may cause greater harm than staying in protected areas.

F80 Practice Test Practice Test