F80 Equipment Operation 2

Question 1

When traveling with a loaded forklift on an incline, the operator should position the load:

Accepted Answer

Facing uphill to keep the load stable

Answer

Traveling with the load uphill prevents the load from sliding off the forks and keeps the center of gravity over the drive wheels.

Question 2

What is the primary purpose of the forklift's overhead guard?

Accepted Answer

To protect the operator from falling objects

Answer

The overhead guard protects the operator from small falling objects but is not designed to withstand the impact of a full load drop.

Question 3

A forklift's load capacity rating applies when the load center is at:

Accepted Answer

24 inches from the fork face

Answer

Standard load capacity ratings assume a 24-inch load center, meaning the load's center of gravity is 24 inches from the face of the forks.

Question 4

When should a forklift operator sound the horn?

Accepted Answer

At every intersection and when pedestrians may be present

Answer

Operators should sound the horn at all intersections and whenever pedestrians or other equipment may be in the vicinity to warn of their approach.

Question 5

Which condition requires an operator to immediately remove a forklift from service?

Accepted Answer

A cracked fork tine detected during pre-shift inspection

Answer

A cracked fork tine is a critical structural defect that can cause the fork to fail under load, requiring the truck to be tagged out until repaired.

F80 Practice Test