EPA Worker Protection & PPE 2

Question 1

After completing lead renovation work, how should a worker's reusable work boots be handled?

Accepted Answer

HEPA-vacuumed or wiped with a damp cloth before leaving the work area

Answer

Reusable work boots should be HEPA-vacuumed or damp-wiped at the work area exit point to prevent tracking lead dust outside.

Question 2

What is the correct way to remove disposable coveralls to minimize lead dust exposure?

Accepted Answer

Roll them inward (inside-out) from the shoulders downward

Answer

Rolling coveralls inward while removing them keeps any surface lead dust contained inside the garment, minimizing re-suspension.

Question 3

Which of the following renovation tasks generates the HIGHEST levels of airborne lead dust?

Accepted Answer

Dry sanding or dry scraping lead-painted surfaces

Answer

Dry sanding and dry scraping generate the greatest amounts of fine airborne lead dust particles among renovation activities.

Question 4

Under the RRP Rule, which renovation activity is specifically PROHIBITED due to high lead dust generation?

Accepted Answer

Open-flame burning or torching of lead-based paint

Answer

Open-flame burning or torching of lead-based paint is explicitly prohibited by the RRP Rule because it generates toxic lead fumes and particles.

Question 5

If a worker performing lead renovation work shows symptoms of lead poisoning such as headache and fatigue, what is the appropriate response?

Accepted Answer

Remove the worker from exposure and seek medical evaluation

Answer

Any worker showing signs of lead exposure symptoms must be removed from the work area immediately and evaluated by a medical professional.

EPA - Environmental Protection Agency Certified Renovator Practice Test