EPA Lead Paint Testing & Identification

Question 1

Which test kit color result indicates the presence of lead when using an EPA-recognized lead test kit?

Accepted Answer

Pink or red

Answer

Yellow or orange

Answer

Blue or green

Answer

No color change

Question 2

What is the regulatory threshold for lead-based paint under the EPA RRP Rule?

Accepted Answer

1.0 mg/cm² or 0.5% by weight

Answer

0.5 mg/cm² or 0.1% by weight

Answer

2.0 mg/cm² or 1.0% by weight

Answer

0.1 mg/cm² or 0.05% by weight

Question 3

Which method is considered the most accurate for determining whether paint contains lead?

Accepted Answer

Laboratory analysis by an accredited lab

Answer

EPA-recognized chemical spot test kit

Answer

X-ray fluorescence (XRF) analyzer used by a renovator

Answer

Visual inspection by a certified renovator

Question 4

Under the EPA RRP Rule, who is authorized to use an XRF analyzer to test for lead-based paint?

Accepted Answer

Only a certified lead inspector or risk assessor

Answer

Any certified renovator

Answer

Any trained renovation worker

Answer

Any licensed contractor

Question 5

If an EPA-recognized test kit gives a negative result but the renovator suspects lead, what should be done?

Accepted Answer

Assume lead is present and follow lead-safe work practices

Answer

Proceed without lead-safe practices since the test was negative

Answer

Apply a second coat of paint to cover potential lead

Answer

File a waiver with the EPA before proceeding

Question 6

What must a renovator do before using an EPA-recognized test kit on a painted surface?

Accepted Answer

Read and follow the manufacturer's instructions for the specific kit

Answer

Sand the surface to remove any topcoat

Answer

Apply a chemical primer to activate the surface

Answer

Notify the occupants and wait 24 hours