CWS WLAN Hardware and Antennas Questions and Answers

Question 1

A network administrator needs to provide a wireless connection between two buildings that are 500 meters apart. Which type of antenna would be most suitable for this point-to-point link?

Accepted Answer

Highly-directional antenna

Answer

Highly-directional antennas, such as parabolic dish or grid antennas, are designed to focus RF energy into a very narrow beam. This high concentration of energy allows the signal to travel long distances with minimal loss, making them ideal for point-to-point links between buildings. Omnidirectional and dipole antennas radiate signals in a 360-degree pattern and are not suitable for long-distance, focused links. A leaky coaxial cable is a type of antenna used for providing coverage in confined spaces like tunnels.

Question 2

Which of the following technologies uses multiple antennas at both the transmitter and receiver to improve performance through techniques like spatial multiplexing and antenna diversity?

Accepted Answer

MIMO (Multiple-Input Multiple-Output)

Answer

MIMO (Multiple-Input Multiple-Output) is a technology that utilizes multiple antennas for both transmitting and receiving data. This allows for techniques like spatial multiplexing, which sends multiple data streams simultaneously to increase throughput, and antenna diversity, which improves link reliability by mitigating the effects of fading. SISO uses a single antenna for both transmit and receive. RF splitting divides a signal but doesn't inherently involve multiple antennas for performance enhancement. Beamforming can be used with MIMO but is a separate technique for focusing signals.

Question 3

A wireless technician is installing an access point in a large, open office to provide 360-degree coverage. Which antenna polarization is most commonly used for this type of indoor omnidirectional deployment?

Accepted Answer

Vertical Polarization

Answer

Vertical polarization is most commonly used for omnidirectional antennas in typical WLAN deployments. The antennas on client devices are often vertically oriented, and matching the polarization of the transmitter and receiver antennas is crucial for optimal signal strength. A mismatch, such as one antenna being vertical and the other horizontal, can cause significant signal loss.

Question 4

A technician is deploying a new Wi-Fi 6 access point that requires 22 watts of power. Which IEEE PoE standard is the minimum requirement to power this device?

Accepted Answer

802.3at (PoE+)

Answer

The IEEE 802.3at standard, also known as PoE+, can deliver up to 30 watts of power from the Power Sourcing Equipment (PSE), with up to 25.5 watts available to the Powered Device (PD). Since the access point requires 22 watts, 802.3at is the minimum standard that can meet this requirement. The original 802.3af (PoE) standard only provides up to 15.4 watts, which is insufficient. While 802.3bt standards would also work, 802.3at is the minimum required.

Question 5

You need to connect a single access point radio to two separate antennas to cover two different areas. Which piece of hardware is required to divide the RF signal from the radio to the two antennas?

Accepted Answer

An RF splitter

Answer

An RF splitter, also known as a power divider, is a passive device used to take a single input signal and distribute it to two or more output ports. In this scenario, it would take the signal from the access point's radio and divide it to feed both antennas. An amplifier boosts a signal, an attenuator reduces it, and a lightning arrestor protects against electrical surges.

CWS Exam Practice Test

CWS Exam Practice Test

CWS WLAN Hardware and Antennas Questions and Answers