CWS 802.11 Standards and Protocols Questions and Answers

Question 1

A network administrator is designing a wireless network for a small office that has many cordless phones and microwave ovens, which are known to cause interference in the 2.4 GHz band. To minimize the impact of this interference, which 802.11 standard should be exclusively used?

Accepted Answer

802.11a

Answer

The 802.11a standard operates exclusively in the 5 GHz frequency band, which is less crowded and not susceptible to interference from common 2.4 GHz devices like cordless phones and microwave ovens. 802.11b and 802.11g operate in the 2.4 GHz band. While 802.11n can operate in both bands, specifying the 2.4 GHz band would not solve the interference issue.

Question 2

Which of the following 802.11 amendments introduced Multiple-Input Multiple-Output (MIMO) technology, significantly increasing throughput by using multiple antennas to transmit and receive data simultaneously?

Accepted Answer

802.11n

Answer

802.11n was a major advancement in Wi-Fi technology, and its key innovation was the introduction of MIMO. This technique uses multiple antennas for both the transmitter and receiver to improve communication performance, allowing for higher data rates and increased range compared to previous standards like 802.11a, b, and g, which used a single antenna at a time.

Question 3

An organization wants to upgrade its wireless network to support the highest possible data rates and the latest security protocol, WPA3. Which Wi-Fi generation, also known as an IEEE 802.11 standard, should they implement?

Accepted Answer

Wi-Fi 6 (802.11ax)

Answer

Wi-Fi 6, based on the IEEE 802.11ax standard, offers the highest theoretical data rates and introduced mandatory support for the WPA3 security protocol, providing more robust security. While Wi-Fi 5 (802.11ac) offers high speeds, it primarily operates in the 5 GHz band and WPA3 support was not mandatory. Wi-Fi 4 and Wi-Fi 3 are older standards with lower speeds and less advanced security features.

Question 4

What is the primary function of the 802.11e amendment?

Accepted Answer

To introduce Quality of Service (QoS) enhancements.

Answer

The IEEE 802.11e amendment was specifically created to add Quality of Service (QoS) features to the 802.11 standard. This allows for the prioritization of different types of traffic, such as voice and video, over less time-sensitive data, which is crucial for applications like VoIP and media streaming. The Wi-Fi Alliance's WMM certification is based on the 802.11e standard.

Question 5

A user's laptop, which supports 802.11g, is connecting to an 802.11b access point. What is the MAXIMUM data rate the user can expect to achieve?

Accepted Answer

11 Mbps

Answer

When a newer standard device connects to an older standard access point, the connection operates at the capabilities of the older, slower standard due to backward compatibility. Since the access point is 802.11b, the maximum data rate for the entire connection is limited to the 11 Mbps supported by 802.11b, even though the laptop is capable of the 54 Mbps offered by 802.11g.

CWS Exam Practice Test

CWS Exam Practice Test

CWS 802.11 Standards and Protocols Questions and Answers