CSWP Advanced Feature Modification 3 — Questions and Answers
Question 1: You need to change a Mirror feature so it mirrors across a different reference plane. Which step is required?
- Delete the mirror and recreate it using the new plane
- Edit the Mirror feature and reselect the mirror plane in the PropertyManager (Correct answer)
- Rotate the original features and let the mirror update automatically
- Use the Move/Copy Bodies command to relocate the mirrored geometry
Correct answer: Edit the Mirror feature and reselect the mirror plane in the PropertyManager
Editing the Mirror feature allows you to reselect the mirror plane reference without deleting and recreating the feature.
Question 2: A Chamfer feature applied to a specific edge needs its angle changed from 45° to 30°. After editing, what additional check is recommended?
- Verify that no downstream features reference the chamfered edge with dimension relations (Correct answer)
- Rebuild the entire part from scratch to confirm no topology errors
- Change the chamfer type from Angle-Distance to Distance-Distance
- Run Interference Detection between the chamfer and adjacent bodies
Correct answer: Verify that no downstream features reference the chamfered edge with dimension relations
Changing the chamfer angle modifies edge geometry, which can break references in downstream sketches or features that dimensioned to that edge.
Question 3: When you use 'Edit Sketch' on a sketch that drives a Revolve feature, which change could cause the revolve to fail?
- Adding a centerline to the sketch
- Crossing the sketch profile over the axis of revolution (Correct answer)
- Changing a horizontal dimension value
- Adding a construction circle inside the profile
Correct answer: Crossing the sketch profile over the axis of revolution
A Revolve feature requires its profile to be entirely on one side of the axis; crossing the axis creates an invalid self-intersecting solid and fails the feature.
Question 4: You want to modify the instances of a Circular Pattern to skip specific occurrences. Which option in the Circular Pattern PropertyManager enables this?
- Equal Spacing toggle
- Instances to Skip selection box (Correct answer)
- Pattern Seed Only checkbox
- Geometry Pattern option
Correct answer: Instances to Skip selection box
The 'Instances to Skip' field in the Circular Pattern PropertyManager lets you select specific instances in the graphics area to omit from the pattern.
Question 5: Which FeatureManager technique lets you view and edit the suppression state of a feature's individual instances in a pattern?
- Expanding the pattern feature node in the FeatureManager to reveal individual instances (Correct answer)
- Using the Pattern Driven Component Pattern tool
- Editing the pattern's sketch with suppression constraints
- Running the Design Checker on pattern instances
Correct answer: Expanding the pattern feature node in the FeatureManager to reveal individual instances
Expanding a pattern feature in the FeatureManager reveals individual instances that can each be independently suppressed or unsuppressed.
Question 6: A Wrap feature using the 'Scribe' method needs to be changed to 'Emboss'. How do you make this change?
- Delete the Wrap and recreate it with Emboss selected
- Edit the Wrap feature and switch the method radio button in the PropertyManager (Correct answer)
- Convert the scribed surface to a solid using Thicken
- Redefine the source sketch as a 3D sketch
Correct answer: Edit the Wrap feature and switch the method radio button in the PropertyManager
Editing the Wrap feature opens its PropertyManager where the Scribe/Emboss/Deboss method selection can be changed directly.
Question 7: When modifying a Rib feature's thickness, which direction option controls whether material is added symmetrically or only to one side of the rib sketch?
- Draft angle setting
- Flip Material Side checkbox or Both Sides toggle (Correct answer)
- Normal to Sketch option
- Reference geometry plane selection
Correct answer: Flip Material Side checkbox or Both Sides toggle
The 'Flip Material Side' checkbox and 'Both Sides' option in the Rib PropertyManager control whether thickness is applied to one or both sides of the sketch plane.
CSWP Advanced Feature Modification 3
You need to change a Mirror feature so it mirrors across a different reference plane.
Which step is required?