Engineering Drawings & Detailing Standards Flashcards

In SOLIDWORKS drawings, which dimension type automatically updates when a Geometric Tolerance (GD&T) feature control frame is placed on a feature?

Answer: Driving dimension

Driving dimensions control the model geometry and update automatically, ensuring the feature control frame reflects actual model values.

When inserting a Section View in a SOLIDWORKS drawing, which line type is used to define the cutting plane?

Answer: Cutting plane line

Cutting plane lines (thick chain lines with arrows) define the cut location and direction for section views per ASME Y14.3.

Which ASME standard governs dimensioning and tolerancing practices used in SOLIDWORKS engineering drawings in the US?

Answer: ASME Y14.5

ASME Y14.5 is the US standard for dimensioning and tolerancing, covering GD&T symbols and rules used in engineering drawings.

In a SOLIDWORKS drawing, a 'Broken-Out Section' view is used to:

Answer: Show a partial interior cross-section without a separate section view

A Broken-Out Section removes a portion of the view to expose interior features without creating a separate full section view.

When setting up a SOLIDWORKS drawing sheet, 'Third Angle Projection' is standard in which country/region?

Answer: United States and Canada

Third Angle Projection is the standard in the United States and Canada, while Europe and most of Asia use First Angle Projection.

Which SOLIDWORKS annotation tool is used to specify the finish quality of a machined surface on a drawing?

Answer: Surface Finish Symbol

The Surface Finish Symbol (Ra) specifies the roughness average or texture required on a machined surface.

In SOLIDWORKS, which option in Drawing Properties controls whether dimensions are shown in millimeters or inches on the sheet?

Answer: Document Properties > Units

Document Properties > Units sets the unit system (mm or inches) that drives how dimensions are displayed on the drawing sheet.