CSWP CSWP Drawing Views and Annotations 2

Question 1

In a SolidWorks drawing, which dimension type measures the true length along a curved arc entity?

Accepted Answer

Arc Length Dimension

Answer

Arc Length Dimension places a dimension showing the actual distance along the arc path, distinguished from the chord length or the radius.

Question 2

The Ordinate dimensioning scheme in SolidWorks drawings measures all dimensions relative to what?

Accepted Answer

A common baseline or datum origin

Answer

Ordinate dimensioning chains all dimensions back to a single zero-origin datum, eliminating accumulated tolerance errors common with chained dimensions.

Question 3

Which tolerance type displays the allowable variation as two stacked numerical limits (maximum above, minimum below)?

Accepted Answer

Limit

Answer

The Limit tolerance type shows the maximum and minimum acceptable values stacked as two separate numbers, making the acceptable range immediately clear.

Question 4

In GD&T, the Flatness tolerance controls what characteristic of a surface?

Accepted Answer

How flat the surface is regardless of its position or orientation

Answer

Flatness is a form control that constrains all points of a surface to lie within two parallel planes separated by the tolerance value, with no datum reference required.

Question 5

Which GD&T symbol specifies that a cylindrical surface must fall within a cylindrical tolerance zone that is coaxial with its true axis?

Accepted Answer

Cylindricity

Answer

Cylindricity is a composite form control requiring that all surface elements of a cylinder simultaneously satisfy roundness, straightness, and taper, all within a single cylindrical zone.

(CSWP) Certified Solidworks Professional Practice Test

(CSWP) Certified Solidworks Professional Practice Test

CSWP CSWP Drawing Views and Annotations 2