CSWP CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features 1

Question 1

In a SolidWorks Sweep feature, what is the required minimum input?

Accepted Answer

A profile sketch and a path sketch

Answer

A Sweep requires at minimum one closed profile sketch and one path sketch along which the profile is extruded.

Question 2

What is the primary difference between a Loft and a Sweep feature in SolidWorks?

Accepted Answer

A Loft blends between multiple profiles while a Sweep extrudes one profile along a path

Answer

A Loft transitions between two or more profile sketches at different planes, while a Sweep moves a single profile along a defined path.

Question 3

In a SolidWorks Loft, what is the purpose of guide curves?

Accepted Answer

To control the shape of the loft between profiles

Answer

Guide curves pass through matching points on each profile and constrain the loft boundary shape between sections.

Question 4

Which option in the Sweep feature ensures the profile remains oriented consistently relative to the sweep path?

Accepted Answer

Follow Path

Answer

The 'Follow Path' orientation option keeps the profile perpendicular to the path tangent as it sweeps, maintaining consistent orientation.

Question 5

What constraint must guide curves in a Loft feature satisfy?

Accepted Answer

They must pass through a point on each profile

Answer

Guide curves must pierce or be coincident with a vertex or point on each loft profile to properly constrain the loft shape.

(CSWP) Certified Solidworks Professional Practice Test