CSWP - Certified Solidworks Professional Advanced Feature Modification Questions and Answers 1

Question 1

You are tasked with modifying a solid body to create a localized depression on its surface. The shape of the depression must be controlled by pushing and pulling control points on a grid applied to the selected face. Which SOLIDWORKS feature is best suited for this task?

Accepted Answer

Freeform

Answer

The Freeform feature is specifically designed for modifying faces by pushing and pulling control points on a grid of control curves. This gives direct, interactive control over the deformation of a surface, which is ideal for creating complex, organic shapes like a grip or depression. Deform works with points, curves, or surfaces but offers less granular control than the point grid of Freeform. Indent uses a tool body to create a pocket or protrusion. Flex is used for bending, twisting, tapering, or stretching an entire body.

Question 2

A design requires creating a pocket in a 'Target Body' that perfectly matches the contour of a separate 'Tool Body'. The operation must also maintain a specific clearance between the two bodies. Which feature should be used to accomplish this in a multi-body part environment?

Accepted Answer

Indent

Answer

The Indent feature is specifically designed to create an offset pocket or protrusion on a target body that matches the contour of a tool body, allowing for precise control over thickness and clearance values. While Combine-Subtract can remove the volume of one body from another, it doesn't inherently provide options for clearance or thickness. Deform with Surface Push modifies a surface using another, but it's more for shaping than creating a precise offset pocket. The Cavity feature is used in the context of mold design and is a different workflow.

Question 3

When using the Flex feature to twist a cylindrical rod, what does the 360-degree angle input represent?

Accepted Answer

The total angular rotation of one trim plane relative to the other.

Answer

In the Flex feature's Twist operation, the angle specified determines the total rotation of one trim plane with respect to the other. A 360-degree input results in one complete revolution or twist between the two planes. The twist is centered about the triad, meaning each side of the triad rotates 180 degrees to achieve the full 360-degree twist between the ends.

Question 4

Which of the following scenarios is the MOST appropriate use case for the Deform feature with the 'Point' option?

Accepted Answer

Creating a dimple or small dome on a curved surface by selecting a single location.

Answer

The Deform feature using the 'Point' option is ideal for creating localized deformations, such as a dimple or dome, centered around a selected point, vertex, or location on a face. Bending and twisting are best handled by the Flex feature. Creating a pocket from a tool body is the primary function of the Indent feature.

Question 5

You need to apply a text-based logo onto a conical surface. The logo must be recessed into the part (debossed). Which feature allows you to wrap a sketch containing the text onto the non-planar surface and remove material?

Accepted Answer

Wrap

Answer

The Wrap feature is designed to take a 2D sketch and wrap it onto a planar or non-planar (cylindrical or conical) face. It has specific options to 'Emboss' (add material), 'Deboss' (remove material), or 'Scribe' (split the face). Project Curve and Split Line only create curves or split faces on the surface; they do not add or remove material. An Extruded Cut can only remove material in a linear direction from the sketch plane.

(CSWP) Certified Solidworks Professional Practice Test

(CSWP) Certified Solidworks Professional Practice Test

CSWP - Certified Solidworks Professional Advanced Feature Modification Questions and Answers 1