CSWE Study Guide 2026
Everything you need to pass the CSWE exam in one place: the exam format, every topic to study, real practice questions with explanations, flashcards, and full-length practice tests. Free, no sign-up needed.
CSWE exam key facts
- The Certified SOLIDWORKS Expert (CSWE) exam lasts 4 hours. Source
- Candidates need a score of at least 80% to pass the Certified SOLIDWORKS Expert (CSWE) exam. Source
- Candidates who fail the Certified SOLIDWORKS Expert (CSWE) exam must wait 90 days before retaking it, and there is no limit on the number of retakes. Source
📚 CSWE Topics to Study (21)
✍️ Sample CSWE Questions & Answers
1. What is the appropriate action when discovering a colleague has violated professional standards?
Professional standards require reporting violations through proper channels to protect the public and maintain the integrity of the profession.
2. How often should compliance procedures be reviewed and updated?
Compliance procedures should be reviewed regularly and updated whenever regulations change, new risks emerge, or organizational changes occur.
3. What is a 'Lofted Surface' in SOLIDWORKS and what are 'guide curves' used for in this context?
A Lofted Surface blends smoothly through a series of cross-section profiles, and guide curves constrain the intermediate shape to prevent undesirable bulging or twisting between profiles.
4. In SOLIDWORKS, what is an 'Alternate Position View' primarily used for in assembly drawings?
An Alternate Position View superimposes the alternate (moved) position of assembly components using phantom lines over the original position to illustrate range of motion or travel.
5. When using a SOLIDWORKS 'Boundary Surface', what is the purpose of defining both Direction 1 and Direction 2 curves?
Boundary Surface uses two sets of crossing guide curves to precisely control the surface shape in both parametric directions, yielding higher-quality curvature than a standard loft.
6. What is the function of the 'Center Mark' annotation in SOLIDWORKS drawings?
Center Marks place a cross (+) symbol at the center of circular and arc features, providing a visual reference point used for dimensioning and inspection.
🎯 Free CSWE Practice Tests
📖 CSWE Guides & Articles
What Practice Test Geeks adds beyond an AI chat for CSWE
An AI chatbot can quiz you, but it can't reproduce the exam conditions or keep your record. Here you get:
- A fixed CSWE question bank: the same test every attempt, so your score is comparable from one try to the next instead of changing with every regenerated quiz.
- Progress saved on your device: completed tests, scores and missed questions stay in My Progress, so you can retake only what you got wrong.
- A printable CSWE cheat sheet you can print or save as a PDF.
- CSWE flashcards built from the same question bank.
- Free CSWE practice tests with the correct answer shown after each question.
How this page was made: written with AI tools. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- solidworks.com — Eligibility, passing score, retake policy, time limit, test delivery · verified Oct 2026