CSWE Drawing & Detailing Flashcards

When creating a Detail View in a SOLIDWORKS drawing, what does the 'Full Outline' option display?

Answer: A complete closed circle or profile shape for the detail boundary

The 'Full Outline' option displays the complete closed circular or sketch boundary shape around the detail view area on the drawing sheet.

In SOLIDWORKS drawings, what is the primary purpose of a 'Broken-out Section' view?

Answer: To expose interior features by removing a portion of the model within a drawn boundary

A Broken-out Section view removes a user-defined portion of the drawing view to expose internal features without creating a full section cut through the model.

What does a 'Projected View' create in a SOLIDWORKS drawing?

Answer: An orthographic view projected at 90° from an existing parent view

A Projected View creates a standard orthographic view by projecting perpendicular (90°) from an existing parent drawing view.

Which SOLIDWORKS drawing view type is specifically designed to show the true shape of an inclined or angled surface by projecting perpendicular to it?

Answer: Auxiliary View

An Auxiliary View is projected perpendicular to an angled or inclined surface to display its true size and shape, which standard orthographic views cannot show accurately.

In SOLIDWORKS, what is an 'Alternate Position View' primarily used for in assembly drawings?

Answer: Overlaying a second position of assembly components in phantom lines to show range of motion

An Alternate Position View superimposes the alternate (moved) position of assembly components using phantom lines over the original position to illustrate range of motion or travel.

What does the 'Sheet Scale' setting in SOLIDWORKS drawing sheet properties control?

Answer: The default scale applied to new drawing views placed on that sheet

Sheet Scale sets the default scale ratio used when new drawing views are placed on that sheet; individual views can override this value independently.

In SOLIDWORKS, which view type uses phantom lines to superimpose a displaced position of assembly components onto the original position within a single drawing view?

Answer: Alternate Position View

The Alternate Position View uses phantom lines to overlay a second position of moving components in the same view, showing the extent of motion or travel.