CSWA Sweep and Loft Features 2

Question 1

In a Loft feature, what are guide curves used for?

Accepted Answer

To control the shape transition between loft profiles

Answer

Guide curves in a loft control how the transition between profiles is shaped, providing more precise control over intermediate geometry.

Question 2

Which option in the Loft PropertyManager controls tangency at the start and end profiles?

Accepted Answer

Start/End Constraints

Answer

Start/End Constraints control the tangency condition at the beginning and end profiles, with options such as Normal to Profile or Direction Vector.

Question 3

For a sweep profile to correctly follow a path, the path must:

Accepted Answer

Pierce the profile sketch plane at exactly one point

Answer

The sweep path must pierce through the profile sketch at a single point to correctly define the direction and origin of the sweep.

Question 4

The 'Thin Feature' option in the Sweep command is used to:

Accepted Answer

Add uniform wall thickness to an open profile to create a solid

Answer

The Thin Feature option applies a specified thickness to an open (non-closed) profile sketch, converting it into a solid wall thickness during the sweep.

Question 5

Which SolidWorks feature would be best suited to create a wine glass shape?

Accepted Answer

Loft

Answer

A Loft is ideal for a wine glass because it can blend between different cross-sectional profiles at different heights, capturing the varying shape from base to rim.

CSWA - Certified Solidworks Associate Practice Test

CSWA - Certified Solidworks Associate Practice Test

CSWA Sweep and Loft Features 2