CSWA - Certified Solidworks Associate Assembly Management Questions and Answers

Question 1

When inserting the very first component into a new, empty assembly, what is its default state and what does the `(f)` prefix next to its name in the FeatureManager Design Tree signify?

Accepted Answer

The component is fixed, and the `(f)` indicates its origin is locked to the assembly's origin.

Answer

The component is floating, and the `(f)` indicates it is the 'first' component.

Answer

The component is flexible, and the `(f)` indicates its sub-assembly components can move.

Answer

The component is floating, meaning it has all degrees of freedom.

Question 2

An unconstrained component is inserted into an assembly (it is not the first component). By default, how many degrees of freedom does this component have?

Accepted Answer

6 (three translational and three rotational)

Answer

3 (three translational)

Answer

2 (one translational and one rotational)

Answer

0 (it is fully constrained upon insertion)

Question 3

Which SolidWorks tool is used to perform a static check to find and report the exact volumetric overlap between two or more components in an assembly?

Accepted Answer

Interference Detection

Answer

Collision Detection

Answer

Clearance Verification

Answer

Mate Expert

Question 4

In a large machine design, you have modeled a gearbox as a separate assembly file. You then insert this entire gearbox assembly into the main machine assembly. In this context, the gearbox assembly is referred to as a:

Accepted Answer

Sub-assembly

Answer

Component Pattern

Answer

Derived Part

Answer

Flexible Component

Question 5

You need to send a complete SolidWorks assembly and all its referenced parts and drawings to a colleague. What is the primary purpose of the 'Pack and Go' tool?

Accepted Answer

To gather all referenced files into a single folder or zip file to prevent broken links.

Answer

To compress the assembly file size for faster email transmission.

Answer

To create a single, read-only eDrawings file from the assembly.

Answer

To automatically simplify all complex parts to improve performance.

Question 6

While using the 'Move Component' command, you want SolidWorks to stop the component's movement and provide an alert the instant it touches any other component in the assembly. Which specific option should be enabled for this dynamic, real-time checking?

Accepted Answer

Collision Detection

Answer

Interference Detection

Answer

Physical Dynamics

Answer

Dynamic Clearance