CSP Certified Safety Professional (CSP) 5

Question 1

Under OSHA's Walking-Working Surfaces standard (29 CFR 1910 Subpart D), what is the minimum height at which fall protection is required for general industry employees working on unprotected walking-working surfaces?

Accepted Answer

4 feet

Answer

OSHA 29 CFR 1910.28 requires fall protection when employees are exposed to fall hazards of 4 feet or more in general industry.

Question 2

A chemical has a flash point of 73°F and a boiling point below 100°F. Under OSHA HazCom, this chemical is classified as which flammable liquid category?

Accepted Answer

Category 1

Answer

GHS Category 1 flammable liquids have flash points below 73°F (23°C) and initial boiling points at or below 95°F (35°C), making them the most hazardous category.

Question 3

Which type of safety inspection is conducted without advance notice to employees or supervisors to obtain an accurate picture of day-to-day conditions?

Accepted Answer

Unannounced inspection

Answer

Unannounced inspections capture actual working conditions rather than conditions that may be temporarily improved in anticipation of an inspection.

Question 4

In behavior-based safety (BBS), which observation element is most critical for producing lasting behavioral change?

Accepted Answer

Providing immediate, specific, positive feedback to workers

Answer

Immediate and specific positive feedback reinforces safe behaviors by connecting the desired action to a positive consequence in real time.

Question 5

Under workers' compensation systems, which benefit type covers the costs of medical treatment, surgery, and rehabilitation directly resulting from a work-related injury?

Accepted Answer

Medical benefits

Answer

Medical benefits in workers' compensation cover all reasonable and necessary medical care costs related to the occupational injury or illness.

Certified Safety Professional Exam Practice Test

Certified Safety Professional Exam Practice Test

CSP Certified Safety Professional (CSP) 5