Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

ASTM and CPSC Standards Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 ASTM and CPSC Standards flashcards as text

  1. According to ASTM F1487, what is the maximum allowable height of a protective barrier on equipment intended for children ages 2-5?

    Answer: 29 inches

    ASTM F1487 specifies that protective barriers for equipment designed for children ages 2-5 must be at least 29 inches high.

  2. The CPSC Handbook for Public Playground Safety recommends a minimum use zone of how many feet around freestanding climbing equipment under 4 feet high?

    Answer: 6 feet

    The CPSC recommends a minimum 6-foot use zone around all sides of freestanding climbing equipment less than 4 feet in height.

  3. Under ASTM F1487, which of the following is classified as an 'elevated surface' requiring fall zone consideration?

    Answer: Any platform 20 inches or more above the protective surface

    ASTM F1487 defines an elevated surface as any platform 20 inches or more above the protective surfacing level.

  4. ASTM F1292 is the standard that addresses which aspect of playground safety?

    Answer: Impact attenuation of surfacing materials

    ASTM F1292 specifically covers the impact attenuation of surfacing materials used beneath playground equipment.

  5. According to CPSC guidelines, what is the minimum depth of wood chips or wood mulch required to provide adequate fall protection under equipment with a fall height of 7 feet?

    Answer: 9 inches

    The CPSC recommends a minimum depth of 9 inches of wood chips or mulch for equipment with fall heights up to 7 feet.

  6. Which ASTM standard specifically governs the performance requirements of impact-attenuating surfacing for playgrounds, including HIC values?

    Answer: ASTM F1292

    ASTM F1292 governs impact attenuation performance, including the Head Injury Criteria (HIC) threshold of 1000 for playground surfacing.

  7. According to ASTM F1487, what is the maximum allowable protrusion for a bolt end extending beyond a nut on playground equipment?

    Answer: 2 threads

    ASTM F1487 allows bolt ends to protrude no more than 2 threads beyond the nut to minimize injury risk.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. nrpa.org — Passing score, retake fee, retake policy, time limit, score validity, test delivery, eligibility, exam format, score release, renewal · verified Oct 2026
  2. apps.nrpa.org — Fees · verified Oct 2026