← All CPFS Flashcard Decks

Kitchen Operations Flashcards

7 cards from real CPFS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Kitchen Operations flashcards as text
  1. During a health inspection, an inspector asks for documentation of the operation's food safety training program. Under HACCP principles, which document type BEST demonstrates ongoing compliance?

    Answer: Temperature logs and corrective action records

    Temperature logs and corrective action records demonstrate that critical control points are being monitored and deviations are addressed, which is the core of HACCP verification.

  2. A food worker is prepping raw oysters on a busy Friday night. Which personal protective measure is REQUIRED?

    Answer: Wearing single-use gloves and washing hands before gloving

    Single-use gloves must be worn when handling ready-to-eat or raw shellfish, and handwashing before gloving is required to prevent glove contamination.

  3. A manager receives a delivery of fresh ground beef. What is the maximum acceptable internal product temperature at time of receiving?

    Answer: 41°F

    Raw ground beef must be received at 41°F (5°C) or below; product above this temperature should be rejected.

  4. Which type of thermometer is BEST suited for checking the surface temperature of a large stockpot of soup during service?

    Answer: Infrared laser thermometer aimed at the liquid surface

    An infrared thermometer quickly measures surface temperature of liquids without immersion, making it ideal for a quick surface check on a large pot during service.

  5. A cook is preparing a marinade containing raw beef, and the manager wants to use the leftover marinade as a sauce. What must happen first?

    Answer: Boil the marinade to 165°F before serving as a sauce

    A marinade that contacted raw meat must be brought to a full boil (165°F) to destroy pathogens before it can be served as a sauce.

  6. An employee reports that a dish machine is producing cloudy, yellowish water in the final rinse cycle. What is the MOST likely cause and action?

    Answer: The final rinse temperature is too low, causing improper rinsing; check the booster heater

    Cloudy rinse water often indicates the sanitizer or rinse is not activating properly due to low temperature; the booster heater should be inspected to ensure minimum 180°F rinse temp.

  7. A kitchen worker cuts their finger while slicing vegetables and applies a bandage. What additional step is REQUIRED before returning to food prep?

    Answer: Wear a brightly colored, waterproof bandage covered by a single-use glove

    A wound on the hand must be covered with a waterproof, brightly colored bandage AND a single-use glove to prevent both contamination and detection difficulty if the bandage falls off.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. neha.org — Test delivery, eligibility, exam format, passing score, registration deadline, renewal, retake policy, score release, score validity, exam information · verified Nov 2026
  2. pearsonvue.com — Registration, test dates · verified Oct 2026