CMI Post-Remediation Clearance Testing

Question 1

Post-remediation verification (PRV) clearance testing should be conducted under which site conditions to ensure valid results?

Accepted Answer

Immediately after remediation while containment barriers are still in place

Answer

Testing while containment is still in place is the most rigorous approach: if the contained area passes, it will certainly remain acceptable once barriers come down. Testing after containment removal risks cross-contamination from other building areas; sampling during active remediation while machines run artificially cleans the air sample; and testing before final cleaning does not reflect the completed state of remediation.

Question 2

Which IICRC S520 criterion must be met for a visual inspection to pass post-remediation clearance?

Accepted Answer

No visible mold growth remains and no musty odor is present in the remediated area

Answer

IICRC S520 requires visual clearance to confirm no visible mold growth and no musty odor, as these are the fundamental observable indicators that remediation is complete. Zero spore counts are neither required nor achievable in practice; complete material replacement is one remediation method but not a universal clearance criterion; and outdoor air equivalence via air sampling supplements but does not precede visual clearance.

Question 3

During post-remediation air sampling for clearance, what is the preferred condition regarding building HVAC and air circulation?

Accepted Answer

HVAC should be in normal operation and, if possible, the area disturbed (e.g., gentle agitation) to resuspend settled spores for a more challenging clearance standard

Answer

Normal HVAC operation combined with gentle disturbance of settled dust creates the most rigorous real-world test condition, ensuring that any residual spores are captured in the sample. Shutting off HVAC allows spores to settle and artificially depresses counts; opening windows dilutes indoor air and masks remaining contamination; and leaving negative air machines running artificially filters the air being sampled.

Question 4

A post-remediation clearance air sample from a remediated bedroom shows a Cladosporium-dominated count slightly higher than the outdoor control. This result most likely indicates:

Accepted Answer

Normal variation; Cladosporium is a common outdoor genus and a slight indoor elevation may reflect infiltration rather than a remediation problem

Answer

Cladosporium is ubiquitous outdoors and readily infiltrates buildings through normal air exchange, so a slight indoor elevation above the outdoor control reflects normal infiltration rather than a remediation problem. A true clearance failure would involve significantly elevated counts of colonizing genera such as Aspergillus/Penicillium; Cladosporium does not indicate Stachybotrys contamination; and minor count variation between samples is statistically expected.

Question 5

Post-remediation clearance testing is performed by which party to maintain objectivity under IICRC S520?

Accepted Answer

An independent third-party assessor not affiliated with the remediation company

Answer

IICRC S520 mandates an independent third-party assessor for clearance testing to eliminate the conflict of interest inherent in self-verification. The remediation contractor has a financial incentive to pass their own work; the property owner lacks expertise and equipment; and the mold laboratory only analyzes submitted samples—it does not conduct site inspections or issue pass/fail determinations.

(CMI) Certified Mold Inspector Practice Test

(CMI) Certified Mold Inspector Practice Test

CMI Post-Remediation Clearance Testing