Laser Equipment Operation and Maintenance Flashcards
6 cards from real CLS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Laser Equipment Operation and Maintenance flashcards as text
What does the acronym LASER stand for?
Answer: Light Amplification by Stimulated Emission of Radiation
LASER stands for Light Amplification by Stimulated Emission of Radiation. The process involves exciting atoms in a gain medium to a higher energy state; when stimulated by an incoming photon, they emit a second identical photon, and this process is amplified within a resonant optical cavity to produce a coherent, monochromatic, collimated beam.
Which component of a laser system provides the energy source that excites the gain medium to produce laser light?
Answer: Pump source
The pump source provides external energy (electrical, optical, or chemical) to excite atoms in the gain medium to higher energy levels, creating population inversion. Common pump sources include flash lamps (for Nd:YAG and Alexandrite), laser diodes (for diode-pumped lasers), and electrical discharge (for CO₂ lasers).
What is the function of the output coupler in a laser resonator?
Answer: To partially transmit the laser beam out of the cavity while partially reflecting it back for further amplification
The output coupler is one of the two mirrors in the laser resonator cavity. Unlike the high-reflectivity back mirror (100% reflective), the output coupler has a partial reflectivity (e.g., 50–95%), allowing a fraction of the intracavity light to exit as the useful laser beam while reflecting the remainder back for continued stimulated emission and gain.
Which daily maintenance task is most important for ensuring consistent and safe laser handpiece function?
Answer: Inspecting and cleaning the handpiece optical window and contact tip, and verifying spot size on test paper
The handpiece optical window and contact surface accumulate debris (char, tissue residue, coupling gel) that scatter and absorb the beam, reducing delivered fluence and creating hot spots. Daily inspection, cleaning, and spot-size verification on test paper are essential to ensure accurate energy delivery and protect both patients and equipment.
What is the purpose of the interlock system on a medical laser?
Answer: To prevent accidental laser emission by requiring positive confirmation before the beam can be activated
Laser interlock systems are safety mechanisms that prevent accidental beam emission. They include key switches (preventing unauthorized use), door interlocks (shutting down the laser if the treatment room door opens), footswitch enables (requiring deliberate foot activation), and beam shutters. All must be active and functional before patient treatment.
A diode laser system displays an 'E1 – Over Temperature' fault code. What should the operator do first?
Answer: Stop treatment, power down the system, allow it to cool, and consult the operator manual before contacting the service engineer
An over-temperature fault indicates the laser has exceeded a safe thermal limit, which can damage the diode array or other components. The correct response is to immediately stop treatment and power down the system to allow cooling. The operator manual should be consulted for the specific fault code, and the service engineer contacted if the fault persists after cooling.