CHST - Construction Health and Safety Technician Hazards and PPE 1

Question 1

Which OSHA standard governs the use of personal protective equipment in construction, including requirements for employer-provided PPE?

Accepted Answer

29 CFR 1926.95

Answer

29 CFR 1926.95 is the OSHA construction industry standard specifically governing PPE requirements, including the employer's obligation to provide, maintain, and ensure proper use of required protective equipment on construction sites.

Question 2

A construction worker is cutting concrete in an enclosed space with limited ventilation. Beyond silica dust controls, which additional hazard must be assessed and managed?

Accepted Answer

Oxygen deficiency and carbon monoxide from equipment exhaust

Answer

In enclosed or poorly ventilated spaces, gas-powered cutting equipment produces carbon monoxide exhaust that can accumulate rapidly, and the confined space may already have reduced oxygen levels, creating a potentially lethal atmosphere independent of dust hazards.

Question 3

Which class of hard hat provides both impact protection and electrical insulation up to 20,000 volts?

Accepted Answer

Class B

Answer

Class B hard hats are designed to protect against impact and penetration from falling objects AND provide electrical insulation rated up to 20,000 volts, making them appropriate for work near high-voltage electrical hazards.

Question 4

What is the correct sequence for donning a chemical-resistant suit when handling hazardous materials on a construction site?

Accepted Answer

Respirator first, then suit, then outer gloves, then boots

Answer

The respirator is donned first to protect airways before any chemical exposure risk during suiting up; then the suit is closed over the respirator straps to create a seal, outer gloves are taped to the suit sleeves, and boots complete the barrier — ensuring no skin or airway is exposed during the donning process.

Question 5

On a construction site where workers are exposed to total noise levels of 95 dBA for an 8-hour shift, what is the maximum allowable exposure duration per OSHA's noise standard before hearing protection becomes mandatory?

Accepted Answer

4 hours

Answer

Per OSHA 29 CFR 1926.52, the permissible exposure time at 95 dBA is 4 hours. Above this duration, engineering controls or hearing protection must be implemented. The standard uses a 5 dB exchange rate, halving allowable time for every 5 dB increase above 90 dBA.

CHST - Construction Health and Safety Technician Practice Test

CHST - Construction Health and Safety Technician Practice Test

CHST - Construction Health and Safety Technician Hazards and PPE 1