CER Handling, Transport, and Storage Questions and Answers 5

Question 1

When should an endoscope be inspected for external damage as part of the transport and handling workflow?

Accepted Answer

Before and after each transport

Answer

Inspecting before and after transport detects damage that occurred during handling and prevents use of a compromised scope.

Question 2

What does SGNA guidance state about the use of absorbent foam or padding inside endoscope transport containers?

Accepted Answer

Foam should be used to cushion but must be kept dry and clean

Answer

Absorbent foam provides cushioning but must be kept dry and clean; wet or soiled foam becomes a contamination source.

Question 3

A storage cabinet for processed endoscopes should be located in an area that is:

Accepted Answer

In a clean, low-traffic area with controlled access

Answer

Clean, low-traffic areas with controlled access minimize the risk of environmental recontamination of processed endoscopes.

Question 4

Which type of endoscope accessory must NEVER be stored inside the endoscope channel during transport or storage?

Accepted Answer

Cleaning brushes

Answer

Cleaning brushes should never remain in channels as they can cause internal damage and harbor residual contamination.

Question 5

What is the correct response when an endoscope is found to have moisture visible inside the channel after storage?

Accepted Answer

Remove from service and reprocess before use

Answer

Visible moisture in a stored channel indicates an incomplete drying process; the scope must be fully reprocessed before it is safe for patient use.

CER - Certified Endoscope Reprocessor Practice Test