CDS Safety Regulations & OSHA Compliance 2

Question 1

Under OSHA 29 CFR 1926.850, what must be done before demolition work begins on any structure?

Accepted Answer

Conduct an engineering survey of the structure

Answer

OSHA 1926.850 requires a competent person to conduct an engineering survey of the structure before demolition begins to determine potential hazards.

Question 2

What is the maximum permissible noise exposure level for an 8-hour workday under OSHA standards?

Accepted Answer

90 dBA

Answer

OSHA's permissible exposure limit (PEL) for noise is 90 dBA for an 8-hour time-weighted average (TWA) per 29 CFR 1910.95.

Question 3

Which OSHA standard specifically covers hazardous waste operations including demolition sites with hazardous materials?

Accepted Answer

29 CFR 1910.120

Answer

29 CFR 1910.120 (HAZWOPER) governs hazardous waste operations and emergency response, including demolition sites where hazardous materials are present.

Question 4

When must a demolition supervisor stop work and report to OSHA?

Accepted Answer

When a fatality or hospitalization of 3+ workers occurs

Answer

OSHA requires employers to report fatalities within 8 hours and in-patient hospitalizations of 3 or more employees within 24 hours.

Question 5

Under OSHA 1926.502, what is the minimum height at which fall protection is required for construction and demolition workers?

Accepted Answer

6 feet

Answer

OSHA 1926.502 requires fall protection for construction and demolition workers at heights of 6 feet or more above a lower level.

(CDS) Certified Demolition Supervisor Practice Test

(CDS) Certified Demolition Supervisor Practice Test

CDS Safety Regulations & OSHA Compliance 2