Mixed Deck — All CBP Topics Flashcards

Which item belongs in a homeowner maintenance manual rather than in the builder's warranty obligations?

Answer: Periodically re-caulking tub and shower joints

Re-caulking wet-area joints is routine homeowner maintenance because sealants naturally shrink and degrade over time.

When multiple subcontractors must work in the same limited space during the same time period, the GC should use which coordination tool to manage daily workflow?

Answer: A short-interval production schedule

A short-interval production schedule (typically a 2–3 week lookahead) details day-by-day activities by trade, enabling the GC to sequence overlapping subcontractor work and prevent conflicts in congested areas.

What is the maximum sill height for an emergency escape and rescue opening above the finished floor?

Answer: 44 inches

IRC R310.2.2 sets a maximum sill height of 44 inches above the floor.

Which EPA label recognizes new homes built with extra indoor air quality measures on top of ENERGY STAR requirements?

Answer: Indoor airPLUS

EPA's Indoor airPLUS label requires moisture, radon, pest, HVAC, and low-emission material controls beyond ENERGY STAR.

How should equipment be maintained for technical measurements operations?

Answer: Follow manufacturer-recommended preventive maintenance schedules

Preventive maintenance following manufacturer recommendations ensures equipment reliability, safety, and longevity.

A material supplier differs from a subcontractor primarily because a supplier:

Answer: Furnishes materials only and does not perform installation or labor at the jobsite

A material supplier provides materials or equipment that others install, whereas a subcontractor both supplies and installs; this distinction affects contracting requirements, bond obligations, and lien rights.

Which document, signed by a subcontractor upon receiving payment, releases their right to file a mechanic's lien against the property for the amount paid?

Answer: Lien waiver

A lien waiver is signed by a subcontractor or supplier upon payment, waiving their right to file a mechanic's lien against the owner's property for the paid amount.

Which item must be worn when working in areas with potential falling objects?

Answer: Hard hats

Hard hats are essential Personal Protective Equipment (PPE) specifically designed to protect the wearer's head from impacts, falling objects, and electrical hazards. In construction areas where tools, materials, or debris might fall from above, wearing a hard hat significantly reduces the risk of head injuries. Other PPE like safety glasses or gloves serve different protective purposes.

Which statement best distinguishes preventive maintenance from corrective maintenance?

Answer: Preventive maintenance is scheduled to avoid failures; corrective maintenance repairs something after it fails

Preventive work is planned in advance to reduce breakdowns, while corrective work responds to an existing failure.

A subcontractor who consistently fails to maintain the project schedule and causes delays to other trades may be subject to:

Answer: Assessment of liquidated damages as defined in the subcontract agreement

Liquidated damages are a pre-agreed daily monetary amount specified in the subcontract that the GC may assess against a subcontractor whose delays cause measurable harm to the project schedule.

How should hazardous conditions be handled during safety procedures work?

Answer: Stop work, secure the area, report the hazard, and follow safety protocols

All hazardous conditions require immediate action: stop work, secure the area, report the hazard, and follow established safety protocols.

How should equipment be maintained for equipment operation operations?

Answer: Follow manufacturer-recommended preventive maintenance schedules

Preventive maintenance following manufacturer recommendations ensures equipment reliability, safety, and longevity.

A builder's total project cost is $200,000 and the company wants a 20% gross margin on the selling price. What should the selling price be?

Answer: $250,000

Selling price = cost / (1 - margin) = $200,000 / 0.80 = $250,000.

What code compliance requirement applies to environmental standards?

Answer: All work must comply with applicable local, state, and national codes

Code compliance is mandatory for all work, ensuring safety, quality, and legal adherence.

What code compliance requirement applies to material selection?

Answer: All work must comply with applicable local, state, and national codes

Code compliance is mandatory for all work, ensuring safety, quality, and legal adherence.

What is a shear wall and what structural function does it serve?

Answer: A wall designed to resist lateral forces (wind and seismic) acting parallel to its surface

A shear wall is a structural element, typically plywood or OSB sheathed, that resists horizontal (lateral) forces from wind or earthquakes by acting as a vertical diaphragm.

Which item should a builder provide the homeowner at closing to support long-term maintenance and warranty service?

Answer: A homeowner manual with warranty terms, maintenance guidelines, and product information

A homeowner manual explains warranty coverage and maintenance duties, which reduces avoidable warranty claims.

What environmental protection measure applies to code compliance?

Answer: Proper handling, storage, and disposal of materials according to environmental regulations

Proper handling, storage, and disposal of all materials according to environmental regulations is a legal obligation in all trades.

Under EPA's 2022 CGP, how often must sites (outside reduced-frequency conditions) be inspected?

Answer: At least every 7 calendar days, or every 14 days plus within 24 hours of a 0.25-inch storm

The CGP lets operators inspect either weekly, or biweekly plus within 24 hours after a storm of 0.25 inch or more.

What is a mechanic's lien in the context of construction?

Answer: A legal claim against a property by unpaid contractors or suppliers

A mechanic's lien is a security interest in a property filed by contractors, subcontractors, or suppliers who have not been paid for their work or materials.