Quality Assurance Protocols Flashcards

What action must a BAT take if an EBT displays an 'invalid sample' or 'interference detected' message during a test?

Answer: Void the test and document the malfunction on the CCF

An 'invalid sample' message means the test cannot be evaluated; the BAT must void the test and note the reason on the Alcohol Testing Form.

Which of the following is a required element of a Quality Assurance Plan (QAP) for EBT devices?

Answer: Inspection, maintenance, and calibration procedures

A QAP must include documented procedures for inspection, maintenance, and calibration of each EBT model used.

An EBT's self-diagnostic check fails at the start of a test sequence. The BAT should:

Answer: Remove the device from service

A failed self-diagnostic indicates the instrument may not be functioning correctly and it must be removed from service.

What is the purpose of the 'air blank' reading that an EBT conducts before and between breath samples?

Answer: To confirm the breath channel is free of residual alcohol

The air blank reading ensures no residual alcohol remains in the instrument's breath chamber from a previous test or environmental source.

According to 49 CFR Part 40, what value must an air blank reading show to allow testing to continue?

Answer: 0.000 g/210L

The air blank must read 0.000 g/210L; any non-zero reading requires the BAT to take corrective action before proceeding.

How long must records of EBT calibration checks be retained under DOT regulations?

Answer: 5 years

Calibration check records must be retained for 5 years under 49 CFR Part 40.333.

A BAT discovers that the last calibration check sticker on the EBT expired two days ago. The correct course of action is to:

Answer: Remove the device from service until calibration is completed

An EBT that has exceeded its calibration interval must be removed from service and recalibrated before it can be used for testing.