Practice Test GeeksAutoCAD - AutoCAD Design Certification Practice Test
← All AUTOCAD Flashcard Decks

Regulatory Frameworks & Compliance Flashcards

7 cards from real AUTOCAD practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Regulatory Frameworks & Compliance flashcards as text

  1. Which layer naming convention is defined by the AIA (American Institute of Architects) CAD Layer Guidelines for US architectural projects?

    Answer: A-WALL-FULL for architectural full-height walls

    The AIA CAD Layer Guidelines use a discipline code prefix format such as A-WALL-FULL for architectural full-height wall layers.

  2. NCS (National CAD Standard) in the US is a collaboration between which organizations?

    Answer: AIA, CSI, and NIBS

    The National CAD Standard is published jointly by the American Institute of Architects (AIA), Construction Specifications Institute (CSI), and National Institute of Building Sciences (NIBS).

  3. When AutoCAD drawings are submitted for building permits in the US, which type of stamp is legally required on the sheets?

    Answer: A licensed professional engineer or architect's seal

    US permit submissions require a wet or digital seal from a licensed professional engineer or architect registered in that jurisdiction.

  4. IFC (Industry Foundation Classes) is a file format standard relevant to AutoCAD BIM workflows. Which organization maintains this standard?

    Answer: buildingSMART International

    buildingSMART International maintains the IFC standard as an open, neutral format for BIM data exchange.

  5. In AutoCAD electrical drawings for US projects, which standard defines wire identification, terminal markings, and schematic diagram layouts?

    Answer: NFPA 79 (Electrical Standard for Industrial Machinery)

    NFPA 79 defines requirements for electrical schematic diagrams, wire identification, and terminal markings in industrial machinery applications.

  6. A drafter applying GD&T in AutoCAD notices the drawing calls for a perpendicularity tolerance. Which ANSI/ASME Y14.5 symbol represents perpendicularity?

    Answer: ⊥ (right angle symbol)

    The perpendicularity GD&T symbol is the right angle (⊥) symbol as defined in ANSI/ASME Y14.5.

  7. Which US environmental regulation may require AutoCAD site plan drawings to include stormwater management features with specific notation?

    Answer: EPA Clean Water Act Section 402 (NPDES permits)

    NPDES permits under the Clean Water Act Section 402 require site plans to document stormwater management controls and drainage features.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. autodesk.com — Renewal, retake policy, test delivery, eligibility, passing score, time limit, score validity, fees, score release · verified Oct 2026