Practice Test GeeksAutoCAD - AutoCAD Design Certification Practice Test
← All AUTOCAD Flashcard Decks

Coordinate Systems & Navigation Flashcards

7 cards from real AUTOCAD practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Coordinate Systems & Navigation flashcards as text

  1. What does WCS stand for in AutoCAD?

    Answer: World Coordinate System

    WCS (World Coordinate System) is the fixed, absolute coordinate system in AutoCAD from which all other coordinate systems are derived.

  2. When entering coordinates in the format "@3,4", what type of coordinate entry is being used?

    Answer: Relative Cartesian

    The @ symbol indicates relative coordinates measured from the last point, and two comma-separated values indicate Cartesian (X,Y) format.

  3. Which function key toggles the coordinate display on the AutoCAD status bar?

    Answer: F6

    F6 toggles the coordinate display on the status bar between off, absolute, and relative polar coordinate modes.

  4. In AutoCAD, what polar coordinate entry would draw a line 5 units long at a 45-degree angle from the current point?

    Answer: @5<45

    Relative polar coordinates use the format @distance<angle, so @5<45 draws from the current point at 45 degrees for 5 units.

  5. What command is used to define or change a User Coordinate System in AutoCAD?

    Answer: UCS

    The UCS command allows users to define, name, and manage User Coordinate Systems to simplify drawing in different orientations.

  6. When Dynamic Input is enabled, coordinate entry defaults to which format?

    Answer: Relative Cartesian

    With Dynamic Input enabled, coordinate entry defaults to relative Cartesian (from the last point) unless overridden with # for absolute or < for polar.

  7. Which system variable controls the coordinate display format in the AutoCAD status bar?

    Answer: COORDS

    The COORDS system variable controls coordinate display: 0=off, 1=absolute Cartesian, 2=distance and angle updated during moves.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. autodesk.com — Renewal, retake policy, test delivery, eligibility, passing score, time limit, score validity, fees, score release · verified Oct 2026