Heat Load Calculations and System Sizing Flashcards
7 cards from real Air Conditioning Repair practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 7 Heat Load Calculations and System Sizing flashcards as text
A home requires 36,000 BTU/hr of cooling capacity. What is the correct equipment size in tons?
Answer: 3 tons
Dividing 36,000 BTU/hr by 12,000 BTU/hr per ton equals 3 tons, which is the correct equipment size for this load.
What happens when an air conditioning system is undersized relative to the building's peak cooling load?
Answer: It runs continuously but cannot maintain the desired setpoint on peak days
An undersized system will run continuously at full capacity but still be unable to maintain the thermostat setpoint during peak outdoor design conditions.
Which software platform is widely used by HVAC contractors to perform Manual J residential load calculations?
Answer: Wrightsoft Right-Suite
Wrightsoft Right-Suite (and similar programs such as Elite RHVAC) automate the Manual J calculation process, reducing errors and saving time compared to manual calculations.
In load calculations, the U-value of a building assembly describes which property?
Answer: The overall heat transfer coefficient of the assembly
U-value is the overall heat transfer coefficient, expressing how much heat flows through an assembly per square foot per degree of temperature difference; it is the mathematical inverse of R-value.
What does the ventilation load component account for in an HVAC load calculation?
Answer: Conditioning intentionally introduced outdoor fresh air
The ventilation load accounts for the sensible and latent energy required to condition the fresh outdoor air that is intentionally introduced into the building to meet indoor air quality standards.
In a multi-zone HVAC system, how should each zone's equipment or airflow capacity be determined?
Answer: Size each zone for its own peak cooling demand
Each zone must be individually sized for its own peak demand because different zones can experience maximum loads at different times due to varying sun exposure, occupancy patterns, and internal gains.
What does the 'diversity factor' account for in commercial HVAC load calculations?
Answer: The recognition that not all loads peak simultaneously, allowing reduced total system capacity
The diversity factor reduces the calculated peak load because in large buildings, all occupants, lighting, and equipment rarely reach their maximum values at the exact same time, allowing for more economical system sizing.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy