โ† All Air Conditioning Repair Flashcard Decks

Refrigeration System Repair Flashcards

7 cards from real Air Conditioning Repair practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Refrigeration System Repair flashcards as text
  1. The cause of sporadic AC cooling is being identified. Both the high side and low side pressure gauge readings are displayed intermittently on the gauge set, and the high side occasionally decreases below 100 psi. What is the MOST likely reason for the following?

    Answer: Stuck expansion valve

    An intermittently stuck expansion valve is the most likely cause of sporadic AC cooling and fluctuating pressure readings. If the valve occasionally restricts flow too much or too little, it will lead to inconsistent refrigerant metering. When it restricts flow excessively, the high-side pressure might drop significantly (below 100 psi) as the compressor struggles to move refrigerant past the blockage, leading to inconsistent cooling.

  2. What happens in an evaporator in a cooling and refrigeration system?

    Answer: The refrigerant absorbs the latent heat

    In an evaporator, the low-pressure liquid refrigerant absorbs latent heat from the surrounding air, typically the cabin air in an AC system. As it absorbs this heat, the refrigerant changes phase from a liquid to a gas, effectively cooling the air that passes over the evaporator coil. This phase change and heat absorption are fundamental to the cooling process.

  3. The following statements about a receiver/dryer are all true, EXCEPT:

    Answer: Evacuating system removes moisture from a saturated receiver/dryer

    The question asks for the statement that is NOT true. While evacuating an AC system removes air and some moisture, it cannot remove moisture from a *saturated* receiver/dryer. Once the desiccant in the receiver/dryer is saturated with moisture, it loses its ability to absorb more and must be replaced, as evacuation alone cannot restore its function. The other statements correctly describe aspects of receiver/dryers.

  4. What happens in a condenser in a cooling and refrigeration system?

    Answer: The refrigerant releases the latent heat.

    In a condenser, the high-pressure, high-temperature gaseous refrigerant releases its latent heat to the cooler ambient air, typically aided by a fan. As it releases this heat, the refrigerant changes phase from a gas back into a liquid. This process is essential for dissipating the heat absorbed from the cabin and completing the refrigeration cycle.

  5. According to technician A, a gasket or O-ring is used to seal the system at every air conditioning connection. According to Technician B, lubricating the O-ring with the appropriate refrigerant oil before replacing it would help prevent nicks and make installation easier. Who is correct?

    Answer: Both Technician A and B

    Technician A is correct because AC systems operate under high pressure and require hermetic seals to prevent refrigerant leaks, which are provided by gaskets and O-rings at every connection. Technician B is also correct; lubricating O-rings with the appropriate refrigerant oil before installation is standard practice to prevent damage like nicks or twisting during assembly, ensuring a proper and durable seal. Both practices are crucial for effective AC system repair and maintenance.

  6. Which of the following doesn't fit the definition of a compressor?

    Answer: Lateral

    The question asks which term does not fit the definition of a compressor type. Rotary, screw, and reciprocating are all recognized and common types of compressors used in various applications, including air conditioning systems. 'Lateral' is not a classification or type of compressor mechanism.

  7. The term EXCEPT appears in this query. Find the response to this question that CANNOT result in the specified circumstance. Before selecting an answer, thoroughly read the entire question. Regarding the expansion valve, EVERYTHING IS TRUE, EXCEPT FOR

    Answer: When stuck closed, pressure on high side is low and pressure on low side is high.

    The question asks for the statement that is NOT true regarding an expansion valve. If an expansion valve is stuck closed, it severely restricts refrigerant flow, causing the high-side pressure to become *very high* (as the compressor pushes against a blockage) and the low-side pressure to become *very low* (due to insufficient refrigerant reaching the evaporator). Therefore, the statement that high-side pressure is low and low-side pressure is high is incorrect.

Written and edited by , founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy