Refrigeration Cycle Principles Flashcards
6 cards from real Air Conditioning Repair practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 6 Refrigeration Cycle Principles flashcards as text
In a properly operating refrigeration cycle, what is the state and pressure of the refrigerant as it enters the compressor?
Answer: Low-pressure, low-temperature superheated vapor
The refrigerant enters the compressor as a low-pressure, low-temperature superheated vapor. The evaporator's job is to absorb heat, causing the refrigerant to boil from a liquid into a vapor. Superheat is additional heat absorbed after it has fully vaporized, which ensures no liquid enters and damages the compressor.
A technician measures a system's subcooling and finds it to be significantly higher than the manufacturer's specification. Which of the following is the most likely cause?
Answer: A refrigerant overcharge
High subcooling indicates that the refrigerant is being cooled in the condenser more than necessary. This is typically caused by an overcharged system, where excess refrigerant backs up in the condenser, remaining in its liquid state for longer and thus losing more heat.
What is the primary function of the metering device in the refrigeration cycle?
Answer: To create a pressure drop, which lowers the refrigerant's boiling point
The metering device (such as a TXV or capillary tube) creates a restriction that causes a significant drop in pressure. This pressure drop lowers the refrigerant's saturation temperature (boiling point), allowing it to absorb heat and boil in the evaporator.
A technician is diagnosing a residential air conditioning unit that is not cooling effectively. The suction line leading to the compressor is warm to the touch and the superheat is measured to be excessively high. What is a probable cause for these symptoms?
Answer: The system is undercharged or has a restriction.
Excessively high superheat means the refrigerant vapor is gaining too much heat after boiling in the evaporator. This is often caused by an undercharge of refrigerant or a restriction (like a clogged filter drier or kinked line), which starves the evaporator and causes the refrigerant to vaporize too early in the coil.
Which of the following describes the process occurring within the condenser coil?
Answer: High-pressure vapor refrigerant rejects heat and condenses into a liquid.
The condenser receives high-pressure, high-temperature vapor from the compressor. As outdoor air is blown across the condenser coils, the refrigerant rejects heat to the ambient air, causing it to desuperheat and then condense into a high-pressure liquid.
The fundamental principle of the refrigeration cycle is based on which thermodynamic concept?
Answer: The relationship between a fluid's pressure and its boiling point.
The refrigeration cycle works by manipulating the refrigerant's pressure. By lowering the pressure in the evaporator, its boiling point drops, allowing it to absorb heat. By increasing the pressure in the condenser, its boiling point rises, allowing it to release heat to the warmer outdoor air. This pressure-temperature relationship is key.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy