Refrigeration Cycle Principles Flashcards
6 cards from real Air Conditioning Repair practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 6 Refrigeration Cycle Principles flashcards as text
In a standard refrigeration cycle, what is the primary function of the evaporator?
Answer: To absorb heat from the space to be cooled.
The evaporator is the component where the cooling effect takes place. As the low-pressure liquid refrigerant flows through the evaporator coils, it absorbs heat from the surrounding space, causing the refrigerant to boil and change into a vapor.
A technician measures the refrigerant temperature at the suction line and finds it is significantly higher than the saturation temperature corresponding to the suction pressure. What does this condition indicate?
Answer: High superheat
Superheat is the temperature of the refrigerant vapor above its saturation (boiling) point at a given pressure. A high superheat reading indicates that the refrigerant is gaining a large amount of extra heat after it has completely evaporated, which can be a sign of an undercharged system or a starved evaporator.
Which of the following describes the state of the refrigerant as it enters the compressor?
Answer: Low-pressure, low-temperature vapor
The refrigerant leaves the evaporator as a low-pressure, low-temperature vapor (ideally, superheated) and travels through the suction line to the compressor. The compressor is designed to compress vapor, not liquid.
A technician is servicing a residential split system and finds that the liquid line is warm and the system is not cooling effectively. They suspect a component failure. Which component's primary role is to reduce the pressure and temperature of the high-pressure liquid refrigerant before it enters the evaporator?
Answer: Metering device
The metering device (such as a TXV or fixed orifice) creates a pressure drop, which rapidly cools the high-pressure liquid refrigerant and regulates its flow into the evaporator. This allows the refrigerant to absorb heat efficiently in the evaporator coil.
What is the primary purpose of the condenser in the refrigeration cycle?
Answer: To reject heat from the refrigerant, causing it to change from a gas to a liquid.
The condenser receives high-pressure, high-temperature vapor from the compressor and rejects heat to the surrounding environment (usually the outdoor air). This heat rejection causes the refrigerant to condense into a high-pressure liquid.
The process of adding heat to the refrigerant vapor after it has completely boiled into a gas is known as:
Answer: Superheating
Superheating is the process of raising the temperature of the refrigerant vapor above its boiling point (saturation temperature). This is a critical process to ensure that no liquid refrigerant enters and damages the compressor.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy