Refrigerant Handling and Recovery Flashcards
6 cards from real Air Conditioning Repair practice questions. Tap to flip, then mark Knew It or Still Learning โ missed cards come back until you master them.
Read the first 6 Refrigerant Handling and Recovery flashcards as text
Which of the following actions is a direct violation of the EPA's Section 608 "prohibition on venting"?
Answer: Knowingly releasing R-22 from a hose when disconnecting from a residential system.
Section 608 of the Clean Air Act prohibits the knowing release of ozone-depleting and substitute refrigerants (like R-22 and R-410A) into the atmosphere during service or disposal of equipment. Releasing the small amount of refrigerant trapped in a hose is considered a violation. Nitrogen is an inert gas and not subject to this prohibition.
A technician is recovering refrigerant from a system with a confirmed compressor burnout. Which of the following actions is MOST critical to protect the recovery equipment?
Answer: Using an in-line filter-drier on the recovery hose.
A compressor burnout creates acids and sludge in the refrigerant and oil. Using an in-line filter-drier during recovery is essential to capture these contaminants, protecting the recovery machine's compressor, seals, and sensors from damage.
To prevent a recovery cylinder from dangerously over-pressurizing, a technician must ensure it is not filled with liquid refrigerant beyond what percentage of its water capacity by weight?
Answer: 80%
Recovery cylinders must not be filled with liquid refrigerant beyond 80% of their capacity. This leaves a 20% vapor space to allow the liquid to expand with temperature changes, preventing a massive increase in hydrostatic pressure that could rupture the tank.
According to standard safety practices, what is the MINIMUM personal protective equipment (PPE) a technician should wear when connecting and disconnecting refrigerant hoses?
Answer: Safety glasses with side shields and gloves.
Liquid refrigerant can cause severe frostbite on contact with skin and permanent eye damage from splashes. Therefore, safety glasses with side shields and refrigerant-resistant gloves are considered the minimum required PPE for refrigerant handling.
A technician is trying to locate a very slow, intermittent refrigerant leak in a residential split system. A visual inspection reveals no oil traces. Which of the following is the MOST effective method for precisely locating this type of leak?
Answer: Using a high-sensitivity electronic leak detector.
For very slow or intermittent leaks, a high-sensitivity electronic leak detector is the most effective tool. It can detect refrigerant concentrations in parts per million, allowing it to pinpoint leaks that are too small to produce audible hissing or visible bubbles with a soap solution.
To minimize the release of refrigerant when connecting and disconnecting gauges, EPA regulations require service hoses to be equipped with which of the following?
Answer: Low-loss fittings or shut-off valves.
EPA regulations under Section 608 mandate that hoses used for servicing, recovering, and charging must be equipped with low-loss fittings or valves that close automatically when the hose is disconnected. This is to trap the refrigerant within the hose and prevent it from being released into the atmosphere.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy