WALMART MAINTENANCE Plumbing and Facilities 4

Question 1

What is the correct procedure when shutting off water to a Walmart restroom for repairs during store hours?

Accepted Answer

Post an 'Out of Service' sign and notify store management before shutting off water

Answer

Before shutting off water to active areas, maintenance must notify management and post appropriate signage to minimize customer and staff impact.

Question 2

A Walmart technician is replacing a wax ring on a toilet. What should be done before removing the toilet from the floor flange?

Accepted Answer

Turn off the water supply and flush to empty the tank and bowl

Answer

Before removing a toilet, the water supply must be shut off and the tank and bowl flushed empty to avoid spills.

Question 3

Which pipe material is most commonly used for Walmart store drain, waste, and vent (DWV) systems installed in recent construction?

Accepted Answer

PVC (polyvinyl chloride)

Answer

PVC is the dominant material for modern DWV systems due to its low cost, corrosion resistance, and ease of installation.

Question 4

A Walmart produce department has a mop sink that won't drain. After clearing visible debris, the drain still flows slowly. What should the technician do next?

Accepted Answer

Use a drain snake or auger to clear deeper blockage in the line

Answer

A drain snake or auger is the appropriate next step to clear a blockage that persists after removing visible surface debris.

Question 5

What does 'GPF' stand for in the context of Walmart restroom fixtures, and why is it important?

Accepted Answer

Gallons Per Flush — it determines water usage efficiency of toilets and urinals

Answer

GPF (Gallons Per Flush) is the water consumption rating for toilets and urinals, directly affecting water costs and code compliance.

WALMART MAINTENANCE Practice Test

WALMART MAINTENANCE Practice Test

WALMART MAINTENANCE Plumbing and Facilities 4