WALMART MAINTENANCE Plumbing and Facilities 2

Question 1

What is the purpose of a floor drain in a retail store?

Accepted Answer

To collect and channel water from spills, cleaning, or equipment to the sewer system

Answer

Floor drains provide a controlled path for water from mopping, spills, or equipment condensation to reach the sewer system, preventing standing water and slip hazards.

Question 2

What should maintenance check during a regular restroom inspection?

Accepted Answer

Fixtures for leaks, flushing mechanisms, supplies, cleanliness, and ventilation fan operation

Answer

A thorough restroom inspection covers all plumbing fixtures, supply levels, cleanliness, ventilation, and functionality to maintain hygiene standards and prevent maintenance issues.

Question 3

What causes a toilet to run continuously?

Accepted Answer

A faulty flapper valve, fill valve, or improperly adjusted float

Answer

Continuous running typically indicates a flapper valve not sealing properly, a fill valve not shutting off, or a float that is set too high, allowing water to flow into the overflow.

Question 4

What is the purpose of a P-trap under a sink?

Accepted Answer

To hold water that creates a seal preventing sewer gases from entering the building

Answer

The P-trap's water seal blocks sewer gases from traveling up through the drain into the building, maintaining indoor air quality and preventing health hazards.

Question 5

What is the sign of a failing water heater in a commercial setting?

Accepted Answer

Rusty water, inconsistent temperatures, unusual noises, or visible leaks around the base

Answer

These symptoms indicate various water heater problems: rusty water suggests tank corrosion, inconsistent temperatures indicate element or thermostat issues, and base leaks indicate tank failure.

WALMART MAINTENANCE Practice Test

WALMART MAINTENANCE Practice Test

WALMART MAINTENANCE Plumbing and Facilities 2