Practice Test GeeksUK Driver CPC Practice Test
← All CPC Flashcard Decks

Eco-Driving Flashcards

6 cards from real CPC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Eco-Driving flashcards as text

  1. What is the most fuel-efficient way to accelerate in an HGV?

    Answer: Accelerate smoothly and progressively, using the green band on the rev counter

    Smooth, progressive acceleration within the green band (typically 1,000-1,500 rpm) is the most fuel-efficient approach. Aggressive acceleration wastes fuel and increases wear. Block gear changing (skipping gears) can also help when appropriate.

  2. How does anticipating traffic conditions ahead help reduce fuel consumption?

    Answer: Reading the road ahead allows the driver to maintain momentum, reduce unnecessary braking and acceleration

    By looking well ahead and anticipating traffic flow, traffic lights, roundabouts, and hills, drivers can maintain momentum, coast where appropriate, and avoid harsh braking followed by heavy acceleration. This 'smooth driving' approach can save 10-15% on fuel.

  3. What is the most fuel-efficient cruising speed for most HGVs?

    Answer: Between 50-56 mph (the speed limiter range), as fuel consumption increases significantly above these speeds

    Most HGVs are most fuel-efficient at steady speeds between 50-56 mph. Above this, aerodynamic drag increases significantly (doubling for every doubling of speed). The speed limiter (56 mph for most UK HGVs) effectively caps the maximum cruising speed.

  4. How does cruise control help with eco-driving?

    Answer: It maintains a constant speed, preventing the driver from unconsciously varying speed, which wastes fuel

    Cruise control maintains a steady speed, eliminating the small speed variations that occur during manual throttle control. This consistency reduces fuel consumption. However, it should be disengaged on hilly terrain where the driver can manage speed more efficiently.

  5. Why should unnecessary electrical loads be switched off to save fuel?

    Answer: The alternator requires engine power to generate electricity — more electrical load means more fuel consumption

    Every electrical system in the vehicle is ultimately powered by the engine via the alternator. Running unnecessary electrical loads (air conditioning, heated screens, extra lights) increases the load on the alternator, which requires more engine power and therefore more fuel.

  6. What is 'block gear changing' and how does it benefit fuel economy?

    Answer: Skipping intermediate gears when changing up or down, keeping the engine in its efficient range

    Block gear changing means skipping gears (e.g., going from 3rd to 5th or 8th to 5th) rather than changing through every gear sequentially. This keeps the engine in its most efficient rev range and reduces the time spent at inefficient RPMs during gear changes.