Tailor Pressing and Finishing Techniques 3

Question 1

Which finishing technique reduces bulk in seam allowances at inward curves and outward corners?

Accepted Answer

Clipping inward curves and notching outward curves

Answer

Clipping (cutting into inward curves) and notching (removing small wedges from outward curves) allow seam allowances to spread or compress so they lie flat when pressed.

Question 2

What is the recommended pressing technique for a freshly sewn hem?

Accepted Answer

Press the fold to create a clean edge, then press the allowance up while avoiding heavy pressure on the hem fold

Answer

The hem fold is pressed for a clean edge, and the allowance is pressed upward, but heavy pressure from the outside is avoided to prevent a shiny ridge showing on the right side.

Question 3

What does 'blocking' a garment mean in the tailoring finishing process?

Accepted Answer

Pressing and shaping a garment with moisture and forms to achieve the intended silhouette

Answer

Blocking uses steam, moisture, and pressing tools or forms to shape a finished garment into its intended three-dimensional silhouette, particularly important for structured jackets.

Question 4

What is the primary purpose of a sleeve board in tailoring?

Accepted Answer

Pressing sleeves and other narrow tubular sections of a garment

Answer

A sleeve board is a small, narrow ironing board that fits inside sleeves and other cylindrical areas, enabling pressing without creating unwanted creases.

Question 5

When pressing interfaced areas such as cuffs and collars, what is the correct sequence?

Accepted Answer

Press the interfaced side first, then finish from the right side with a pressing cloth

Answer

Pressing the interfaced side first activates and bonds the interfacing properly; a final press from the right side using a pressing cloth then gives a smooth, finished surface.

Tailor Practice Test

Tailor Practice Test

Tailor Pressing and Finishing Techniques 3