Tailor Pressing and Finishing Techniques 2

Question 1

What is a tailor's clapper used for during the pressing process?

Accepted Answer

Pounding steamed fabric to flatten seams and sharpen creases

Answer

A clapper is a hardwood block pounded onto steamed fabric to trap steam inside the fibers, resulting in sharper creases and flatter seams than steam alone achieves.

Question 2

What is a point presser primarily designed for in tailoring?

Accepted Answer

Pressing seams in pointed areas like collar tips and lapels

Answer

A point presser (often combined with a clapper) allows precise, sharp pressing of pointed areas such as collar tips, lapel points, and cuff corners.

Question 3

How should velvet fabric be pressed in a tailoring setting?

Accepted Answer

Face-down on a needle board using steam without direct iron contact

Answer

Velvet must be pressed face-down on a needle board so the fine pins support the pile without crushing it; steam is applied without letting the iron touch the fabric.

Question 4

What is 'top pressing' in tailoring?

Accepted Answer

The final pressing of a completed garment from the right side

Answer

Top pressing is the final pressing stage applied to a finished garment from the right side to give it a polished, professional appearance.

Question 5

When pressing a wool suit lapel, which technique helps maintain its natural roll?

Accepted Answer

Press the lapel over a tailor's ham following its natural roll line

Answer

Pressing the lapel over a tailor's ham while following its roll line preserves the soft three-dimensional curve rather than flattening it.

Tailor Practice Test

Tailor Practice Test

Tailor Pressing and Finishing Techniques 2