Tailor Alterations and Repairs 2

Question 1

What is the purpose of a 'Hong Kong seam finish' in alterations?

Accepted Answer

To bind raw seam edges with a strip of fabric for a clean, durable finish

Answer

A Hong Kong seam finish wraps each raw seam allowance edge individually with a narrow bias-cut fabric strip, creating a clean, couture-quality interior finish.

Question 2

How do you fix a jacket where the back hem is longer than the front hem?

Accepted Answer

Release and re-hang the jacket, leveling the hem from the floor up

Answer

The jacket must be hung on a dress form or worn by the client so the hem can be re-measured from the floor up and marked at an even level before re-hemming.

Question 3

When shortening a jacket sleeve, where is the alteration made for the best result?

Accepted Answer

At the cuff hem, preserving the sleeve head and any buttons

Answer

Shortening a jacket sleeve from the cuff end preserves the original sleeve cap and button details, giving the cleanest result.

Question 4

What alteration is required when a client gains weight and the trouser seat pulls across the buttocks?

Accepted Answer

Let out the back seat seam and possibly the side seams

Answer

When the seat pulls across the buttocks, the back seat seam needs to be let out as much as the seam allowance permits, and the side seams may also need to be eased.

Question 5

What is the purpose of a 'bartack' in garment construction and repair?

Accepted Answer

To reinforce stress points such as pocket corners and belt loop ends

Answer

A bartack is a short, dense zigzag stitch used to reinforce high-stress points like pocket corners, zipper ends, and belt loops, preventing tearing.

Tailor Practice Test

Tailor Practice Test

Tailor Alterations and Repairs 2