Safety Regulations and Compliance Flashcards
7 cards from real STEAMFITTER practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Regulations and Compliance flashcards as text
Which regulatory agency oversees the National Emission Standards for Hazardous Air Pollutants (NESHAP) that may apply to industrial boiler operations at steamfitter job sites?
Answer: EPA
The EPA enforces NESHAP regulations under the Clean Air Act, which establish emission limits for hazardous air pollutants from industrial boilers and process heaters.
Under ASME B31.1, what inspection must be performed after completing a repair weld on an in-service pressure pipe?
Answer: Nondestructive examination (NDE) per the original construction code
ASME B31.1 requires that repair welds on pressure piping be examined using NDE methods consistent with those required during original construction.
What is the primary purpose of Material Safety Data Sheets (SDS) in the context of steamfitting compliance?
Answer: Communicate chemical hazards and safe handling procedures to workers
Safety Data Sheets (SDS) required by OSHA's Hazard Communication Standard (29 CFR 1910.1200) inform workers of chemical hazards and safe handling, storage, and emergency response procedures.
A steamfitter must work on a high-pressure steam line rated at 250 psig. What minimum PPE is required for the face and eyes during blowdown operations?
Answer: Face shield over safety glasses
High-pressure steam blowdown operations require a full face shield worn over safety glasses to protect against sudden steam or hot condensate splash.
Which standard establishes the requirements for brazing procedures and qualifications used in refrigerant and steam piping systems?
Answer: ASME Section IX
ASME Section IX covers qualification of brazing procedures (in addition to welding) and applies to pressure piping systems including refrigerant and steam lines.
Under OSHA's Globally Harmonized System (GHS) of chemical classification, what does a flame pictogram on a chemical label indicate?
Answer: The chemical is flammable or self-reactive
The GHS flame pictogram signals flammable liquids/gases, self-reactive substances, pyrophorics, or self-heating materials — all presenting fire or explosion risk.
What is a 'competent person' as defined by OSHA, and why is this designation critical on steamfitting job sites?
Answer: One capable of identifying existing and predictable hazards with authority to take corrective action
OSHA defines a competent person as one with the knowledge and authority to identify hazards and immediately correct them — this designation triggers specific oversight responsibilities on construction sites.