Standard 11 Generic Induction (GI) — Queensland Coal Mining — Questions and Answers

Question 1: What is the significance of Australian Standards for Strata Control Basics?

They are advisory only
Many are referenced in legislation making compliance legally required, and they set minimum technical requirements (Correct answer)
They only apply to imported products
They are outdated

Correct answer: Many are referenced in legislation making compliance legally required, and they set minimum technical requirements

Australian Standards referenced in WHS Regulations become legal requirements and set the minimum technical benchmarks for compliance.

Question 2: What is the consequence of inadequate Fire Prevention Underground risk management?

Minor inconvenience only
No consequences
Reduced paperwork
Worker injuries, regulatory penalties, prosecution, compensation claims, and reputational damage (Correct answer)

Correct answer: Worker injuries, regulatory penalties, prosecution, compensation claims, and reputational damage

Inadequate risk management can result in injuries, deaths, regulatory enforcement, prosecution, civil claims, and significant reputational damage.

Question 3: What is the significance of Australian Standards for Electrical Safety in Mines?

They are advisory only
They are outdated
Many are referenced in legislation making compliance legally required, and they set minimum technical requirements (Correct answer)
They only apply to imported products

Correct answer: Many are referenced in legislation making compliance legally required, and they set minimum technical requirements

Australian Standards referenced in WHS Regulations become legal requirements and set the minimum technical benchmarks for compliance.

Question 4: What emergency procedures should cover Coal Mining Safety and Health Act scenarios?

Only dialling 000
No emergency procedures needed
A general evacuation plan only
Response actions, evacuation, first aid, communication protocols, and specific hazard responses (Correct answer)

Correct answer: Response actions, evacuation, first aid, communication protocols, and specific hazard responses

Emergency procedures must be comprehensive and specific to the hazards associated with the activity.

Question 5: What penalties apply for non-compliance with Fire Prevention Underground regulations in Australia?

A verbal warning only
Significant fines (up to millions of AUD for corporations) and potential imprisonment for serious offences (Correct answer)
A small administrative fee
No penalties

Correct answer: Significant fines (up to millions of AUD for corporations) and potential imprisonment for serious offences

Australian WHS penalties are severe, with Category 1 offences carrying fines up to AUD 3 million and potential imprisonment.

Question 6: What is the importance of near-miss reporting for Self-Rescue and SCBA Use?

Near misses reveal existing hazards and allow preventive action before injuries occur (Correct answer)
They complicate record keeping
Near misses are not important
They should only be discussed informally

Correct answer: Near misses reveal existing hazards and allow preventive action before injuries occur

Near misses are valuable indicators of hazards that could cause future injuries — reporting them enables preventive action.

Question 7: When is it appropriate to use administrative controls for Fire Prevention Underground risks?

Only on weekends
Never
When elimination, substitution, isolation, and engineering controls are not reasonably practicable (Correct answer)
As the first choice always

Correct answer: When elimination, substitution, isolation, and engineering controls are not reasonably practicable

Administrative controls (procedures, training, rotation) should be used when higher-level controls cannot adequately reduce the risk.

Question 8: What is the role of PPE in managing Gas Detection and Monitoring risks?

PPE is not relevant
PPE is the primary control
PPE eliminates all risks
PPE is the last line of defence, used only when higher-level controls are not reasonably practicable (Correct answer)

Correct answer: PPE is the last line of defence, used only when higher-level controls are not reasonably practicable

PPE is the least effective control in the hierarchy and should only be relied upon when other controls cannot adequately reduce the risk.

Question 9: What is the role of workplace safety committees in Mining Hazards Identification management?

Setting worker salaries
Planning social events
Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements (Correct answer)
No role

Correct answer: Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements

Safety committees provide a structured forum for cooperation between management and workers on WHS matters.

Question 10: What emergency procedures should cover Personal Protective Equipment Mining scenarios?

Response actions, evacuation, first aid, communication protocols, and specific hazard responses (Correct answer)
Only dialling 000
No emergency procedures needed
A general evacuation plan only

Correct answer: Response actions, evacuation, first aid, communication protocols, and specific hazard responses

Emergency procedures must be comprehensive and specific to the hazards associated with the activity.

Question 11: What is the importance of near-miss reporting for Electrical Safety in Mines?

They complicate record keeping
Near misses are not important
Near misses reveal existing hazards and allow preventive action before injuries occur (Correct answer)
They should only be discussed informally

Correct answer: Near misses reveal existing hazards and allow preventive action before injuries occur

Near misses are valuable indicators of hazards that could cause future injuries — reporting them enables preventive action.

Question 12: How should Mining Hazards Identification hazards be communicated to workers?

They should not be communicated
By word of mouth only
Through an annual newsletter
Through inductions, toolbox talks, signage, labels, SDSs, and written procedures before exposure (Correct answer)

Correct answer: Through inductions, toolbox talks, signage, labels, SDSs, and written procedures before exposure

Hazard communication must use multiple channels and occur before workers are exposed to the hazards.

Question 13: What record retention period applies to Fire Prevention Underground documents under WHS Regulations?

No retention required
Typically 5 years, or 30 years for health monitoring and asbestos records (Correct answer)
1 month
Until the end of the project

Correct answer: Typically 5 years, or 30 years for health monitoring and asbestos records

Most WHS records must be kept for 5 years, with longer periods for specific records such as health monitoring (30 years) and asbestos.

Question 14: What consultation requirements exist for Electrical Safety in Mines under WHS law?

Only senior workers are consulted
None — management decides alone
Consultation is voluntary
Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input (Correct answer)

Correct answer: Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input

WHS law requires genuine consultation with workers on matters affecting their safety, including through HSRs and committees.

Question 15: What is the role of PPE in managing Fire Prevention Underground risks?

PPE is not relevant
PPE is the primary control
PPE eliminates all risks
PPE is the last line of defence, used only when higher-level controls are not reasonably practicable (Correct answer)

Correct answer: PPE is the last line of defence, used only when higher-level controls are not reasonably practicable

PPE is the least effective control in the hierarchy and should only be relied upon when other controls cannot adequately reduce the risk.

Question 16: What must a Electrical Safety in Mines procedure include to be effective?

A company letterhead only
A brief paragraph
Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates (Correct answer)
Only a signature page

Correct answer: Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates

Effective procedures must be comprehensive, clear, practical, and include all information needed for safe work.

Question 17: How should new Electrical Safety in Mines risks be incorporated into existing safety systems?

Ignore them
Through review and update of risk assessments, procedures, training, and communication to all affected workers (Correct answer)
Wait for the next scheduled review
File them for future reference

Correct answer: Through review and update of risk assessments, procedures, training, and communication to all affected workers

New risks must be promptly incorporated into risk assessments, procedures, and communicated to all affected workers.

Question 18: How does worker health monitoring relate to Fire Prevention Underground?

It is not related
Health monitoring can identify early signs of harm from ${subjectName} exposures, allowing intervention before serious injury (Correct answer)
It is voluntarily only
It is only for office workers

Correct answer: Health monitoring can identify early signs of harm from ${subjectName} exposures, allowing intervention before serious injury

Health monitoring detects early signs of harm, enabling intervention before conditions become serious or irreversible.

Question 19: What must a Fire Prevention Underground procedure include to be effective?

Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates (Correct answer)
Only a signature page
A company letterhead only
A brief paragraph

Correct answer: Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates

Effective procedures must be comprehensive, clear, practical, and include all information needed for safe work.

Question 20: What penalties apply for non-compliance with Strata Control Basics regulations in Australia?

A verbal warning only
Significant fines (up to millions of AUD for corporations) and potential imprisonment for serious offences (Correct answer)
A small administrative fee
No penalties

Correct answer: Significant fines (up to millions of AUD for corporations) and potential imprisonment for serious offences

Australian WHS penalties are severe, with Category 1 offences carrying fines up to AUD 3 million and potential imprisonment.

Question 21: How often should First Aid in Mining procedures be reviewed?

Never once written
Only when the regulator requests it
Every 20 years
Regularly, after incidents, when conditions change, or when new information emerges (Correct answer)

Correct answer: Regularly, after incidents, when conditions change, or when new information emerges

Procedures must be living documents, reviewed regularly and in response to changes, incidents, and new knowledge.

Question 22: Under Australian law, what rights do workers have regarding Fire Prevention Underground safety?

Only the right to complain
Rights depend on seniority
Rights to information, training, consultation, representation through HSRs, and to cease unsafe work (Correct answer)
No specific rights

Correct answer: Rights to information, training, consultation, representation through HSRs, and to cease unsafe work

Workers have specific legal rights under WHS legislation including information, training, consultation, representation, and refusal of unsafe work.

Question 23: What is the first step in a Fire Prevention Underground risk assessment?

Buy new equipment
Write the final report
Implement controls
Identify all hazards associated with ${subjectName} (Correct answer)

Correct answer: Identify all hazards associated with ${subjectName}

Hazard identification is always the first step — you cannot assess or control risks you have not identified.

Question 24: What supervisory requirements exist for Fire Prevention Underground activities?

Supervision is optional
Only new workers need supervision
Adequate supervision by competent persons, proportionate to the level of risk (Correct answer)
No supervision needed

Correct answer: Adequate supervision by competent persons, proportionate to the level of risk

The level of supervision must be proportionate to the risk level, with competent supervisors overseeing the work.

Question 25: What record retention period applies to First Aid in Mining documents under WHS Regulations?

Until the end of the project
No retention required
1 month
Typically 5 years, or 30 years for health monitoring and asbestos records (Correct answer)

Correct answer: Typically 5 years, or 30 years for health monitoring and asbestos records

Most WHS records must be kept for 5 years, with longer periods for specific records such as health monitoring (30 years) and asbestos.

Question 26: In Australian Queensland coal mining safety, what is the primary purpose of Strata Control Basics procedures?

To slow down operations
To increase paperwork
To satisfy insurance companies
To protect worker health and safety through systematic hazard management (Correct answer)

Correct answer: To protect worker health and safety through systematic hazard management

Strata Control Basics procedures are fundamental to protecting workers under Australian Queensland coal mining safety regulations.

Question 27: What must a First Aid in Mining safety induction cover?

The company's financial performance
Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures (Correct answer)
Company history only
Where to park

Correct answer: Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures

Inductions must cover all information needed for workers to perform the activity safely.

Question 28: What documentation must be maintained for First Aid in Mining activities?

A brief email
No documentation needed
Only financial records
Risk assessments, training records, incident reports, and inspection logs as required by WHS Regulations (Correct answer)

Correct answer: Risk assessments, training records, incident reports, and inspection logs as required by WHS Regulations

WHS Regulations require maintaining various records for compliance, auditing, and incident investigation purposes.

Question 29: What is the role of workplace safety committees in Self-Rescue and SCBA Use management?

Setting worker salaries
Planning social events
No role
Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements (Correct answer)

Correct answer: Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements

Safety committees provide a structured forum for cooperation between management and workers on WHS matters.

Question 30: What is the importance of near-miss reporting for Coal Mining Safety and Health Act?

Near misses are not important
Near misses reveal existing hazards and allow preventive action before injuries occur (Correct answer)
They should only be discussed informally
They complicate record keeping

Correct answer: Near misses reveal existing hazards and allow preventive action before injuries occur

Near misses are valuable indicators of hazards that could cause future injuries — reporting them enables preventive action.

Question 31: What is the importance of near-miss reporting for First Aid in Mining?

They complicate record keeping
Near misses are not important
They should only be discussed informally
Near misses reveal existing hazards and allow preventive action before injuries occur (Correct answer)

Correct answer: Near misses reveal existing hazards and allow preventive action before injuries occur

Near misses are valuable indicators of hazards that could cause future injuries — reporting them enables preventive action.

Question 32: What consultation requirements exist for Fire Prevention Underground under WHS law?

Consultation is voluntary
Only senior workers are consulted
Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input (Correct answer)
None — management decides alone

Correct answer: Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input

WHS law requires genuine consultation with workers on matters affecting their safety, including through HSRs and committees.

Question 33: What is the purpose of monitoring and reviewing Fire Prevention Underground controls?

To verify controls remain effective, identify new hazards, and drive continuous improvement (Correct answer)
To keep workers busy
To justify the safety budget
To create busywork

Correct answer: To verify controls remain effective, identify new hazards, and drive continuous improvement

Monitoring and review ensures controls continue to work as intended and identifies any emerging hazards or improvement opportunities.

Question 34: How should Fire Prevention Underground hazards be communicated to workers?

They should not be communicated
Through an annual newsletter
By word of mouth only
Through inductions, toolbox talks, signage, labels, SDSs, and written procedures before exposure (Correct answer)

Correct answer: Through inductions, toolbox talks, signage, labels, SDSs, and written procedures before exposure

Hazard communication must use multiple channels and occur before workers are exposed to the hazards.

Question 35: What is the role of workplace safety committees in Fire Prevention Underground management?

Setting worker salaries
No role
Planning social events
Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements (Correct answer)

Correct answer: Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements

Safety committees provide a structured forum for cooperation between management and workers on WHS matters.

Question 36: What is the first step in a Coal Mining Safety and Health Act risk assessment?

Write the final report
Implement controls
Buy new equipment
Identify all hazards associated with ${subjectName} (Correct answer)

Correct answer: Identify all hazards associated with ${subjectName}

Hazard identification is always the first step — you cannot assess or control risks you have not identified.

Question 37: What emergency procedures should cover First Aid in Mining scenarios?

Response actions, evacuation, first aid, communication protocols, and specific hazard responses (Correct answer)
No emergency procedures needed
A general evacuation plan only
Only dialling 000

Correct answer: Response actions, evacuation, first aid, communication protocols, and specific hazard responses

Emergency procedures must be comprehensive and specific to the hazards associated with the activity.

Question 38: What is the first step in a First Aid in Mining risk assessment?

Write the final report
Identify all hazards associated with ${subjectName} (Correct answer)
Buy new equipment
Implement controls

Correct answer: Identify all hazards associated with ${subjectName}

Hazard identification is always the first step — you cannot assess or control risks you have not identified.

Question 39: What is the consequence of inadequate Strata Control Basics risk management?

Reduced paperwork
Worker injuries, regulatory penalties, prosecution, compensation claims, and reputational damage (Correct answer)
No consequences
Minor inconvenience only

Correct answer: Worker injuries, regulatory penalties, prosecution, compensation claims, and reputational damage

Inadequate risk management can result in injuries, deaths, regulatory enforcement, prosecution, civil claims, and significant reputational damage.

Question 40: How should new Workplace Health and Hygiene risks be incorporated into existing safety systems?

File them for future reference
Through review and update of risk assessments, procedures, training, and communication to all affected workers (Correct answer)
Wait for the next scheduled review
Ignore them

Correct answer: Through review and update of risk assessments, procedures, training, and communication to all affected workers

New risks must be promptly incorporated into risk assessments, procedures, and communicated to all affected workers.

Question 41: Under Australian regulations, who bears primary responsibility for Self-Rescue and SCBA Use compliance?

Equipment suppliers
Workers only
The PCBU (Person Conducting a Business or Undertaking) (Correct answer)
The general public

Correct answer: The PCBU (Person Conducting a Business or Undertaking)

The PCBU has the primary duty under the WHS Act to ensure compliance with all safety requirements.

Question 42: What obligation does a worker have if they identify a Electrical Safety in Mines hazard?

Report it immediately to their supervisor or HSR, and take reasonable care to protect themselves and others (Correct answer)
Document it in their personal diary only
No obligation
Fix it themselves without telling anyone

Correct answer: Report it immediately to their supervisor or HSR, and take reasonable care to protect themselves and others

Workers have a legal obligation to report hazards and take reasonable care for their own and others' health and safety.

Question 43: What is the purpose of monitoring and reviewing Personal Protective Equipment Mining controls?

To justify the safety budget
To keep workers busy
To create busywork
To verify controls remain effective, identify new hazards, and drive continuous improvement (Correct answer)

Correct answer: To verify controls remain effective, identify new hazards, and drive continuous improvement

Monitoring and review ensures controls continue to work as intended and identifies any emerging hazards or improvement opportunities.

Question 44: What is the first step in a Electrical Safety in Mines risk assessment?

Buy new equipment
Implement controls
Identify all hazards associated with ${subjectName} (Correct answer)
Write the final report

Correct answer: Identify all hazards associated with ${subjectName}

Hazard identification is always the first step — you cannot assess or control risks you have not identified.

Question 45: What is the purpose of monitoring and reviewing First Aid in Mining controls?

To justify the safety budget
To verify controls remain effective, identify new hazards, and drive continuous improvement (Correct answer)
To keep workers busy
To create busywork

Correct answer: To verify controls remain effective, identify new hazards, and drive continuous improvement

Monitoring and review ensures controls continue to work as intended and identifies any emerging hazards or improvement opportunities.

Question 46: What is the significance of Australian Standards for Fire Prevention Underground?

Many are referenced in legislation making compliance legally required, and they set minimum technical requirements (Correct answer)
They are advisory only
They only apply to imported products
They are outdated

Correct answer: Many are referenced in legislation making compliance legally required, and they set minimum technical requirements

Australian Standards referenced in WHS Regulations become legal requirements and set the minimum technical benchmarks for compliance.

Question 47: How should new First Aid in Mining risks be incorporated into existing safety systems?

Through review and update of risk assessments, procedures, training, and communication to all affected workers (Correct answer)
Wait for the next scheduled review
File them for future reference
Ignore them

Correct answer: Through review and update of risk assessments, procedures, training, and communication to all affected workers

New risks must be promptly incorporated into risk assessments, procedures, and communicated to all affected workers.

Question 48: What must a Fire Prevention Underground safety induction cover?

The company's financial performance
Where to park
Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures (Correct answer)
Company history only

Correct answer: Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures

Inductions must cover all information needed for workers to perform the activity safely.

Question 49: What must a Emergency Evacuation Procedures safety induction cover?

Company history only
Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures (Correct answer)
The company's financial performance
Where to park

Correct answer: Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures

Inductions must cover all information needed for workers to perform the activity safely.

Question 50: What is continuous improvement in Strata Control Basics management?

Doing the same thing year after year
Increasing work speed each quarter
Systematically reviewing performance, learning from incidents, and implementing improvements to prevent future harm (Correct answer)
Cutting safety budgets annually

Correct answer: Systematically reviewing performance, learning from incidents, and implementing improvements to prevent future harm

Continuous improvement involves ongoing evaluation and enhancement of safety practices based on monitoring, audits, incidents, and feedback.

Question 51: What is the PCBU's obligation for worker training in Fire Prevention Underground?

To provide information, training, instruction, and supervision adequate for the worker to perform the task safely (Correct answer)
To tell workers to be careful
No obligation exists
To provide a manual only

Correct answer: To provide information, training, instruction, and supervision adequate for the worker to perform the task safely

The PCBU must ensure workers receive adequate information, training, instruction, and supervision appropriate to the nature of the work and risks.

Question 52: What must be done when Fire Prevention Underground legislation changes?

Nothing — old rules still apply
Only update paperwork when audited
Wait to see if the changes are enforced
Update procedures, risk assessments, and training to comply with the new requirements (Correct answer)

Correct answer: Update procedures, risk assessments, and training to comply with the new requirements

Legislative changes must be promptly reflected in procedures, risk assessments, and training to maintain compliance.

Question 53: What is the significance of safety data sheets (SDS) for Fire Prevention Underground?

They are optional reading
They are marketing materials
They only list ingredients
SDSs provide critical safety information including hazards, handling precautions, first aid, and emergency procedures (Correct answer)

Correct answer: SDSs provide critical safety information including hazards, handling precautions, first aid, and emergency procedures

SDSs contain essential information about hazardous substances needed for safe handling, storage, and emergency response.

Question 54: How should Environmental Responsibilities equipment be inspected and maintained?

Only when it breaks
When someone remembers
Per manufacturer specifications and relevant Australian Standards, with documented inspection and maintenance records (Correct answer)
Only for new equipment

Correct answer: Per manufacturer specifications and relevant Australian Standards, with documented inspection and maintenance records

Equipment must be inspected and maintained according to specifications and standards, with all records documented.

Question 55: What is a Code of Practice relevant to Fire Prevention Underground?

A voluntary suggestion only
A company internal policy
A marketing document
A practical guide approved under WHS legislation that can be used as evidence of what is reasonably practicable (Correct answer)

Correct answer: A practical guide approved under WHS legislation that can be used as evidence of what is reasonably practicable

Codes of Practice provide practical guidance with legal significance — they can be cited as evidence of what is known and reasonably practicable.

Question 56: What must a Mining Hazards Identification procedure include to be effective?

Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates (Correct answer)
Only a signature page
A brief paragraph
A company letterhead only

Correct answer: Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates

Effective procedures must be comprehensive, clear, practical, and include all information needed for safe work.

Question 57: What is the hierarchy of controls for managing First Aid in Mining risks?

Administrative controls only
PPE first, then other controls
No hierarchy exists
Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective (Correct answer)

Correct answer: Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective

The hierarchy ranks controls from most effective (elimination) to least effective (PPE), guiding risk control decisions.

Question 58: Under the Coal Mining Safety and Health Act 1999 (Qld), who has a responsibility to identify and manage hazards at a mine site?

Only the site safety officer
Only the mine manager and supervisors
Everyone at the mine site (Correct answer)
Only workers with formal safety training

Correct answer: Everyone at the mine site

The Act places a duty of care on everyone at the mine site — workers, supervisors, managers, and contractors — to identify and manage hazards.

Question 59: How should new Fire Prevention Underground risks be incorporated into existing safety systems?

Ignore them
Wait for the next scheduled review
Through review and update of risk assessments, procedures, training, and communication to all affected workers (Correct answer)
File them for future reference

Correct answer: Through review and update of risk assessments, procedures, training, and communication to all affected workers

New risks must be promptly incorporated into risk assessments, procedures, and communicated to all affected workers.

Question 60: How should new Coal Mining Safety and Health Act risks be incorporated into existing safety systems?

Wait for the next scheduled review
Through review and update of risk assessments, procedures, training, and communication to all affected workers (Correct answer)
File them for future reference
Ignore them

Correct answer: Through review and update of risk assessments, procedures, training, and communication to all affected workers

New risks must be promptly incorporated into risk assessments, procedures, and communicated to all affected workers.

Question 61: How should Fire Prevention Underground incidents be reported in an Australian workplace?

Wait until the weekly meeting
Post on social media
Ignore minor incidents
Report immediately to the supervisor, with notifiable incidents reported to the regulator (Correct answer)

Correct answer: Report immediately to the supervisor, with notifiable incidents reported to the regulator

Incidents must be reported promptly, with notifiable incidents requiring immediate regulator notification.

Question 62: What is the purpose of monitoring and reviewing Mining Hazards Identification controls?

To justify the safety budget
To keep workers busy
To create busywork
To verify controls remain effective, identify new hazards, and drive continuous improvement (Correct answer)

Correct answer: To verify controls remain effective, identify new hazards, and drive continuous improvement

Monitoring and review ensures controls continue to work as intended and identifies any emerging hazards or improvement opportunities.

Question 63: What is the hierarchy of controls for managing Environmental Responsibilities risks?

Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective (Correct answer)
Administrative controls only
PPE first, then other controls
No hierarchy exists

Correct answer: Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective

The hierarchy ranks controls from most effective (elimination) to least effective (PPE), guiding risk control decisions.

Question 64: What supervisory requirements exist for Environmental Responsibilities activities?

Adequate supervision by competent persons, proportionate to the level of risk (Correct answer)
Supervision is optional
No supervision needed
Only new workers need supervision

Correct answer: Adequate supervision by competent persons, proportionate to the level of risk

The level of supervision must be proportionate to the risk level, with competent supervisors overseeing the work.

Question 65: What training is required before workers perform Fire Prevention Underground activities?

Appropriate training covering hazards, procedures, equipment use, and emergency response (Correct answer)
A quick verbal briefing only
Self-study from a pamphlet
No training — learn on the job

Correct answer: Appropriate training covering hazards, procedures, equipment use, and emergency response

Workers must receive comprehensive training appropriate to the risks before performing the activity.

Question 66: How should Fire Prevention Underground risk controls be prioritised when multiple options exist?

Choose the cheapest option
Apply the hierarchy of controls — use the most effective control that is reasonably practicable (Correct answer)
Let workers choose their preferred control
Use all controls simultaneously regardless of cost

Correct answer: Apply the hierarchy of controls — use the most effective control that is reasonably practicable

The hierarchy of controls guides prioritisation — always implement the highest-level (most effective) control that is reasonably practicable.

Question 67: What emergency procedures should cover Fire Prevention Underground scenarios?

A general evacuation plan only
Response actions, evacuation, first aid, communication protocols, and specific hazard responses (Correct answer)
No emergency procedures needed
Only dialling 000

Correct answer: Response actions, evacuation, first aid, communication protocols, and specific hazard responses

Emergency procedures must be comprehensive and specific to the hazards associated with the activity.

Question 68: What must a Emergency Evacuation Procedures procedure include to be effective?

A company letterhead only
A brief paragraph
Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates (Correct answer)
Only a signature page

Correct answer: Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates

Effective procedures must be comprehensive, clear, practical, and include all information needed for safe work.

Question 69: What is a Provisional Improvement Notice (PIN) in the context of Fire Prevention Underground?

A construction permit
A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period (Correct answer)
A workplace award
A salary increment notice

Correct answer: A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period

Trained HSRs can issue PINs when they believe a WHS contravention has occurred, requiring the PCBU to remedy the issue.

Question 70: What is the PCBU's obligation for worker training in Emergency Evacuation Procedures?

To tell workers to be careful
To provide a manual only
To provide information, training, instruction, and supervision adequate for the worker to perform the task safely (Correct answer)
No obligation exists

Correct answer: To provide information, training, instruction, and supervision adequate for the worker to perform the task safely

The PCBU must ensure workers receive adequate information, training, instruction, and supervision appropriate to the nature of the work and risks.

Question 71: What documentation must be maintained for Fire Prevention Underground activities?

A brief email
Only financial records
Risk assessments, training records, incident reports, and inspection logs as required by WHS Regulations (Correct answer)
No documentation needed

Correct answer: Risk assessments, training records, incident reports, and inspection logs as required by WHS Regulations

WHS Regulations require maintaining various records for compliance, auditing, and incident investigation purposes.

Question 72: What is continuous improvement in First Aid in Mining management?

Doing the same thing year after year
Cutting safety budgets annually
Increasing work speed each quarter
Systematically reviewing performance, learning from incidents, and implementing improvements to prevent future harm (Correct answer)

Correct answer: Systematically reviewing performance, learning from incidents, and implementing improvements to prevent future harm

Continuous improvement involves ongoing evaluation and enhancement of safety practices based on monitoring, audits, incidents, and feedback.

Question 73: What is the role of PPE in managing First Aid in Mining risks?

PPE is the primary control
PPE is the last line of defence, used only when higher-level controls are not reasonably practicable (Correct answer)
PPE is not relevant
PPE eliminates all risks

Correct answer: PPE is the last line of defence, used only when higher-level controls are not reasonably practicable

PPE is the least effective control in the hierarchy and should only be relied upon when other controls cannot adequately reduce the risk.

Question 74: How should Coal Mining Safety and Health Act incidents be reported in an Australian workplace?

Report immediately to the supervisor, with notifiable incidents reported to the regulator (Correct answer)
Post on social media
Wait until the weekly meeting
Ignore minor incidents

Correct answer: Report immediately to the supervisor, with notifiable incidents reported to the regulator

Incidents must be reported promptly, with notifiable incidents requiring immediate regulator notification.

Question 75: In Australian Queensland coal mining safety, what is the primary purpose of Fire Prevention Underground procedures?

To increase paperwork
To satisfy insurance companies
To slow down operations
To protect worker health and safety through systematic hazard management (Correct answer)

Correct answer: To protect worker health and safety through systematic hazard management

Fire Prevention Underground procedures are fundamental to protecting workers under Australian Queensland coal mining safety regulations.

Question 76: What is a Provisional Improvement Notice (PIN) in the context of Personal Protective Equipment Mining?

A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period (Correct answer)
A salary increment notice
A workplace award
A construction permit

Correct answer: A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period

Trained HSRs can issue PINs when they believe a WHS contravention has occurred, requiring the PCBU to remedy the issue.

Question 77: What is the consequence of inadequate Emergency Evacuation Procedures risk management?

Minor inconvenience only
No consequences
Reduced paperwork
Worker injuries, regulatory penalties, prosecution, compensation claims, and reputational damage (Correct answer)

Correct answer: Worker injuries, regulatory penalties, prosecution, compensation claims, and reputational damage

Inadequate risk management can result in injuries, deaths, regulatory enforcement, prosecution, civil claims, and significant reputational damage.

Question 78: What consultation requirements exist for Workplace Health and Hygiene under WHS law?

Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input (Correct answer)
None — management decides alone
Consultation is voluntary
Only senior workers are consulted

Correct answer: Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input

WHS law requires genuine consultation with workers on matters affecting their safety, including through HSRs and committees.

Question 79: How often should Electrical Safety in Mines procedures be reviewed?

Regularly, after incidents, when conditions change, or when new information emerges (Correct answer)
Only when the regulator requests it
Never once written
Every 20 years

Correct answer: Regularly, after incidents, when conditions change, or when new information emerges

Procedures must be living documents, reviewed regularly and in response to changes, incidents, and new knowledge.

Question 80: What is the PCBU's obligation for worker training in Mining Hazards Identification?

No obligation exists
To provide information, training, instruction, and supervision adequate for the worker to perform the task safely (Correct answer)
To provide a manual only
To tell workers to be careful

Correct answer: To provide information, training, instruction, and supervision adequate for the worker to perform the task safely

The PCBU must ensure workers receive adequate information, training, instruction, and supervision appropriate to the nature of the work and risks.

Standard 11 Generic Induction (GI) — Queensland Coal Mining

The Standard 11 Generic Induction is a mandatory Queensland coal mining certification covering six nationally recognised safety competency units including work health and safety, hazard and risk control, emergency response, first aid, and electrical safety procedures required before commencing work at any Queensland coal mine.

Questions

120 min

Time Limit

80%

To Pass

Checking for saved progress...

Exam Rules

You can skip questions and return to them later
Flag questions for review before submitting
No feedback shown until you submit the entire exam
Unanswered questions count as wrong — answer everything
10 pretest questions are mixed in and don't affect your score
Timer auto-submits when time runs out
Your progress is auto-saved every 30 seconds

These practice questions were written with AI tools. They are not real exam questions. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

training.gov.au — Eligibility · verified Nov 2026
rshq.qld.gov.au — Test delivery, eligibility, renewal · verified Nov 2026