SSSTS Risk Assessment 2

Question 1

What is a dynamic risk assessment, and when might a site supervisor need to carry one out?

Accepted Answer

A continuous, real-time assessment of changing conditions, used when site conditions change unexpectedly and the formal written assessment no longer covers the situation

Answer

A dynamic risk assessment is an ongoing, real-time process of identifying and assessing risks as conditions change on site. Supervisors use it when unexpected hazards arise, conditions change (e.g., weather), or when the planned work differs from what was anticipated in the formal risk assessment.

Question 2

What information should be recorded when documenting a risk assessment for a construction activity?

Accepted Answer

The hazards identified, who is at risk, existing controls, risk rating, additional controls needed, responsible person, and review date

Answer

A comprehensive risk assessment record should include: the activity/task being assessed, hazards identified, who might be harmed and how, existing control measures, a risk rating (likelihood x severity), any additional controls required, the person responsible for implementation, and a review date.

Question 3

A risk assessment identifies that a task involves manual handling of heavy blocks. What should the supervisor consider under the Manual Handling Operations Regulations 1992?

Accepted Answer

Whether the task can be avoided, and if not, whether mechanical aids can be used, and if manual handling is unavoidable, how to reduce the risk of injury

Answer

Under the Manual Handling Operations Regulations 1992, the hierarchy is: (1) avoid hazardous manual handling so far as reasonably practicable, (2) assess the risk of injury from any manual handling that cannot be avoided, and (3) reduce the risk of injury to the lowest level reasonably practicable, using mechanical aids where possible.

Question 4

What is a COSHH assessment and when is it required on a construction site?

Accepted Answer

An assessment under the Control of Substances Hazardous to Health Regulations 2002, required whenever workers may be exposed to hazardous substances such as cement dust, solvents, or silica

Answer

A COSHH assessment is required under the Control of Substances Hazardous to Health Regulations 2002 whenever workers may be exposed to hazardous substances. On construction sites, this includes cement dust, silica dust from cutting, solvents, adhesives, asbestos, and lead paint.

Question 5

How should a supervisor assess the risk of working at height on a construction site?

Accepted Answer

Consider the Work at Height Regulations 2005: avoid working at height where possible, use the safest means of access (scaffold, MEWP), assess weather conditions, check edge protection, and ensure rescue plans are in place

Answer

Under the Work at Height Regulations 2005, working at height must be avoided where possible. Where it cannot, the supervisor must select the safest means of access, assess environmental conditions (wind, rain, ice), ensure edge protection is adequate, verify equipment inspection, and have rescue plans for falls.

SSSTS Practice Test

SSSTS Practice Test

SSSTS Risk Assessment 2