Simulation and Analysis Flashcards
6 cards from real Solidworks practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Simulation and Analysis flashcards as text
In SolidWorks Simulation, what is a 'Thermal Study' used for?
Answer: Calculating temperature distribution and heat flow through a part
A Thermal Study computes steady-state or transient temperature distributions and heat flux through the model.
What does 'Mesh Refinement' in SolidWorks Simulation do?
Answer: Increases the number of elements in specific areas to improve solution accuracy
Mesh Refinement adds smaller, more numerous elements to high-stress or curved areas to improve result accuracy.
Which SolidWorks Simulation contact condition allows two surfaces to push against each other but not pull apart?
Answer: No Penetration
No Penetration contact allows components to press together and transmit compressive forces, but they can separate freely.
What does the 'Displacement' result plot show in SolidWorks Simulation?
Answer: The amount each node in the mesh moves from its original position under load
The Displacement result displays how much each point of the model deflects in response to the applied loads and fixtures.
In SolidWorks Simulation, which fixture type allows a face to move freely in one direction while fixing all others?
Answer: Roller/Slider
Roller/Slider allows a face to slide in one direction (perpendicular to the fixture) while preventing motion in other directions.
What is the purpose of a 'Fatigue Study' in SolidWorks Simulation?
Answer: Predicts how many load cycles the part can endure before developing a crack or failure
A Fatigue Study uses S-N (stress vs. cycles) curves to predict the life of a component under repeated loading conditions.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- solidworks.com — Eligibility, passing score, retake policy, time limit, test delivery, exam format, exam information · verified Oct 2026
- store.solidworks.com — Fees · verified Oct 2026