Practice Test GeeksSolidworks Practice Test
← All Solidworks Flashcard Decks

Sheet Metal and Weldments Flashcards

6 cards from real Solidworks practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Sheet Metal and Weldments flashcards as text

  1. Which SolidWorks Sheet Metal feature creates a folded flange along multiple connected edges simultaneously with mitered corners?

    Answer: Miter Flange

    Miter Flange adds a continuous flange along a series of connected edges, automatically mitering the corners.

  2. In SolidWorks, what is a 'Weldment' used for?

    Answer: Creating structural members like beams, tubes, and pipes along 2D and 3D sketch paths

    Weldments use structural member profiles from a library applied along sketch paths to build frames and structures.

  3. Which SolidWorks Weldments feature is used to trim or extend structural members to meet correctly at joints?

    Answer: Trim/Extend

    The Trim/Extend feature cuts or extends weldment structural members so they meet cleanly at frame junctions.

  4. What does a 'Cut List' provide in a SolidWorks Weldment?

    Answer: A table of all structural members grouped by profile type and length for fabrication

    The Cut List groups weldment bodies by profile and length, providing the quantities needed for cutting material for fabrication.

  5. Which SolidWorks Sheet Metal feature rolls an edge over on itself to create a safe, smooth edge?

    Answer: Hem

    The Hem feature rolls or folds the edge of a sheet metal part back on itself to eliminate sharp edges.

  6. What is the purpose of 'Relief' cuts in SolidWorks Sheet Metal bends?

    Answer: Small cuts at the ends of bends to prevent material tearing during forming

    Relief cuts prevent the material from tearing at the end of a bend by providing a stress-relieving slot.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. solidworks.com — Eligibility, passing score, retake policy, time limit, test delivery, exam format, exam information · verified Oct 2026
  2. store.solidworks.com — Fees · verified Oct 2026