Practice Test GeeksSolidworks Practice Test
← All Solidworks Flashcard Decks

Part Modeling and Features Flashcards

6 cards from real Solidworks practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Part Modeling and Features flashcards as text

  1. Which SolidWorks feature adds material by extruding a closed sketch profile along a straight path?

    Answer: Extrude Boss/Base

    Extrude Boss/Base creates a solid by extending a 2D sketch profile linearly to a specified depth.

  2. What does the 'Shell' feature do in SolidWorks?

    Answer: Creates a thin-walled part by hollowing out a solid and removing selected faces

    The Shell feature hollows a solid model to a specified wall thickness, optionally removing selected open faces.

  3. Which end condition in an Extrude feature extends the extrusion to the next solid face it encounters?

    Answer: Up To Next

    The 'Up To Next' end condition terminates the extrusion at the first surface or face the geometry intersects.

  4. In SolidWorks, which feature creates a solid by sweeping a profile along a curved path?

    Answer: Sweep

    The Sweep feature generates a solid or surface by moving a 2D profile along a defined 3D path.

  5. What does a 'Draft' feature add to a SolidWorks part?

    Answer: A taper angle to faces to facilitate part ejection from a mold

    Draft applies a taper angle to selected faces so the part can be released from a mold without sticking.

  6. Which SolidWorks feature creates a solid by blending two or more profiles on separate planes?

    Answer: Loft

    The Loft feature transitions smoothly between two or more sketch profiles to form a complex solid.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. solidworks.com — Eligibility, passing score, retake policy, time limit, test delivery, exam format, exam information · verified Oct 2026
  2. store.solidworks.com — Fees · verified Oct 2026