Solidworks Sheet Metal and Weldments 2

Question 1

Which SolidWorks Sheet Metal feature creates a folded flange along multiple connected edges simultaneously with mitered corners?

Accepted Answer

Miter Flange

Answer

Miter Flange adds a continuous flange along a series of connected edges, automatically mitering the corners.

Question 2

In SolidWorks, what is a 'Weldment' used for?

Accepted Answer

Creating structural members like beams, tubes, and pipes along 2D and 3D sketch paths

Answer

Weldments use structural member profiles from a library applied along sketch paths to build frames and structures.

Question 3

Which SolidWorks Weldments feature is used to trim or extend structural members to meet correctly at joints?

Accepted Answer

Trim/Extend

Answer

The Trim/Extend feature cuts or extends weldment structural members so they meet cleanly at frame junctions.

Question 4

What does a 'Cut List' provide in a SolidWorks Weldment?

Accepted Answer

A table of all structural members grouped by profile type and length for fabrication

Answer

The Cut List groups weldment bodies by profile and length, providing the quantities needed for cutting material for fabrication.

Question 5

Which SolidWorks Sheet Metal feature rolls an edge over on itself to create a safe, smooth edge?

Accepted Answer

Hem

Answer

The Hem feature rolls or folds the edge of a sheet metal part back on itself to eliminate sharp edges.

Solidworks Practice Test