System Maintenance Flashcards
6 cards from real SIA CCTV practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 System Maintenance flashcards as text
What is the recommended frequency for cleaning CCTV camera domes and lenses in an outdoor environment?
Answer: As required based on inspection, typically at least quarterly or more often in dusty or coastal environments
Outdoor lenses and domes accumulate dirt, bird droppings, algae, and condensation. Regular inspection and cleaning, at least quarterly and more frequently in harsh environments, is essential to maintain image quality.
During a routine maintenance check, an operator discovers that a camera has been repositioned slightly from its surveyed position. What action should be taken?
Answer: Document the discrepancy, reposition the camera to the correct setting, and investigate how and why it was moved
An unexplained camera repositioning could indicate vandalism, tampering, or accidental disturbance. The correct response is to document the finding, restore the camera to its surveyed position, and investigate the cause to prevent recurrence.
What is the purpose of conducting a 'health check' on a CCTV recording system's storage capacity?
Answer: To ensure that the system has sufficient remaining capacity to record continuously for the required retention period
Storage health checks verify that enough capacity exists to maintain the required retention period (typically 31 days for public space CCTV). If storage is filling faster than expected, the retention period may be shortened, creating gaps in evidential coverage.
A CCTV operator notices that one camera's image suddenly appears very dark even in daylight. What is the most likely cause and first diagnostic step?
Answer: Check whether the lens iris, auto-iris actuator, or IR filter has failed, or whether the lens is physically obstructed
A sudden dark image in daylight suggests a hardware fault such as a stuck iris (closed position), failed auto-iris actuator, blocked lens, or incorrectly engaged IR cut filter, all of which prevent adequate light reaching the sensor.
What should a CCTV maintenance log include as a minimum to satisfy both operational and data protection requirements?
Answer: The date and time of maintenance, work carried out, faults found and rectified, cameras affected, and the identity of the engineer
A comprehensive maintenance log supports operational continuity, demonstrates accountability under UK GDPR, and provides an audit trail showing that the system was functioning correctly or identifying periods when specific cameras were offline.
Why is it important to test the uninterruptible power supply (UPS) of a CCTV system regularly?
Answer: To ensure the system continues recording and remains operational during a mains power failure
A UPS provides battery backup to keep CCTV systems running during power outages. Regular testing ensures the batteries retain sufficient charge and capacity to sustain the system for the required duration during a mains failure.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- assets.publishing.service.gov.uk — Exam information · verified Nov 2026
- gov.uk — Score validity, eligibility, fees, renewal, exam information · verified Oct 2026
- qualifications.pearson.com — Test delivery, exam format, passing score, retake policy, time limit · verified Nov 2026