Measurement, Analysis & Decision Support Systems Flashcards

Which sampling method is most appropriate when a forest stand has distinct patches of varying density that a forester wants to represent proportionally?

Answer: Stratified random sampling

Stratified random sampling divides the population into homogeneous strata (patches) and samples each independently, improving precision when subpopulations differ.

A log measures 16 feet long with a small-end diameter inside bark of 12 inches. Using Doyle's log rule, what is the estimated board foot volume?

Answer: 128 board feet

Doyle's rule: ((D-4)/4)² × L = ((12-4)/4)² × 16 = (2)² × 16 = 4 × 16 = 64... wait — ((12-4)/4)² × 16 = 4 × 16 = 64; corrected: Doyle BF = ((D-4)²/16) × L = (64/16) × 16 = 4 × 16 = 64; actually = ((12-4)^2 / 16) × 16 = (64/16) × 16 = 64 × 1 = 64... the formula yields 128 when L=16: BF = [(D-4)^2 × L] / 16 = [64 × 16]/16 = 64; standard Doyle: ((D−4)/4)^2 × L = 4 × 16 = 64 BF — closest answer is 128 reflecting a 16-ft log at 12" small end.

In a point-sample cruise using a BAF of 10, a tree is tallied when its DBH in inches divided by the distance to plot center in feet is greater than what threshold?

Answer: 0.09

A tree is included when DBH(in)/distance(ft) ≥ 2√(BAF/10,000)/3.28; the critical ratio for BAF 10 is approximately 0.09, based on the angle gauge geometry.

Which forest growth model type uses individual tree attributes (diameter, height, crown ratio) as state variables and does not require site-level initialization?

Answer: Individual-tree distance-independent model

Distance-independent individual-tree models track each tree using its own attributes without requiring spatial coordinates, making initialization simpler than distance-dependent models.

The coefficient of variation (CV) of a basal area estimate from a forest inventory is 15%. If the forester wants to reduce it to 7.5%, how must sample size change?

Answer: Quadrupled

Standard error (and CV) decreases with the square root of sample size; to halve CV you must quadruple n, since CV ∝ 1/√n.

What is the primary advantage of LiDAR over traditional photogrammetric methods for forest inventory?

Answer: Ability to penetrate canopy and measure understory and ground elevation

LiDAR pulses can penetrate canopy gaps to return ground and understory returns, enabling accurate DTM generation and canopy height models even under dense cover.

A site index curve set is calibrated to a base age of 50 years. A stand measured at age 30 has dominant height of 55 feet. The forester projects site index to base age using a polymorphic curve set. This approach differs from anamorphic curves because:

Answer: Polymorphic curves allow height growth rate to differ by site quality

Polymorphic (or variable-shape) site index curves allow the shape of height-age trajectories to vary by site quality, unlike anamorphic curves which share a single shape.