SAEE - Highest and Best Use Analysis Questions and Answers 1

Question 1

An appraiser is analyzing a property with an old, small residential structure located on a large parcel of land. The Highest and Best Use of the land as if vacant is determined to be for commercial development. However, the existing residential structure still generates rental income. Which valuation principle dictates how the appraiser must treat the land and the building in their analysis?

Accepted Answer

Principle of Consistent Use

Answer

The Principle of Consistent Use requires that land and improvements be valued on the same basis. If the highest and best use of the land is for commercial development, the improvements (the house) cannot simultaneously be valued based on its residential use. The value of the improvements would be considered only in the context of their contribution to the commercial use, which may be limited to interim income before demolition.

Question 2

A property's current use as a surface parking lot is legally permissible, physically possible, and financially feasible. However, market trends strongly suggest that developing a high-rise office building on the site will be maximally productive in 5-7 years. The current operation as a parking lot is best described as:

Accepted Answer

An interim use

Answer

An interim use is a temporary use of a property that is currently viable but is expected to be replaced by a different, more profitable use in the future when market conditions allow. The parking lot serves as a temporary use until the development of the high-rise office building becomes the maximally productive use.

Question 3

An appraiser determines that several potential uses for a vacant parcel of land are legally permissible, physically possible, and financially feasible. What is the primary goal of the final test, 'maximally productive'?

Accepted Answer

To select the use that produces the highest present value for the property.

Answer

The 'maximally productive' test is the final filter in the HBU analysis. After identifying uses that are permissible, possible, and feasible, this test selects the one that results in the highest value for the property, whether that is measured by residual land value or overall property value.

Question 4

The four tests for Highest and Best Use analysis are applied sequentially to filter potential uses. Which of the following represents the correct and most common order of this filtering process?

Accepted Answer

Legally Permissible -> Physically Possible -> Financially Feasible -> Maximally Productive

Answer

The analysis begins by considering what uses are legally allowed and physically possible. From that group of potential uses, the analysis then filters for those that are financially viable. Finally, from the viable options, the one that is maximally productive (results in the highest value) is selected as the Highest and Best Use.

Question 5

A developer is analyzing a site for a potential retail center. The proposed use is not allowed under the current zoning, but the local planning department has indicated a 'reasonable probability' of granting a variance. How should an appraiser consider this proposed use in a Highest and Best Use analysis?

Accepted Answer

It can be considered as the Highest and Best Use if the analysis supports it, contingent on the likely zoning change.

Answer

The 'legally permissible' test allows for consideration of uses that have a 'reasonably probable' chance of being permitted, even if they are not allowed under current zoning. The appraiser must provide evidence to support the likelihood of the zoning change for the use to be considered a valid potential Highest and Best Use.

SAEE Test Practice Test

SAEE Test Practice Test

SAEE - Highest and Best Use Analysis Questions and Answers 1