RSP Crane Types & Operational Limits 2

Question 1

Which type of crane is typically fixed to a building structure and used to move loads along a linear path inside a facility?

Accepted Answer

Overhead bridge crane

Answer

An overhead bridge crane is suspended from runway rails mounted to a building structure, allowing loads to be moved along a linear horizontal path inside a facility.

Question 2

When a crane manufacturer's load chart lists a capacity with an asterisk (*), this generally indicates:

Accepted Answer

A special condition or footnote applies, such as a structural limitation

Answer

An asterisk on a load chart directs the operator to a footnote that describes a special condition, restriction, or modification that applies to that specific capacity rating.

Question 3

A rough-terrain crane is specifically designed for:

Accepted Answer

Off-road and uneven ground conditions

Answer

Rough-terrain cranes are built with large, wide tires and four-wheel drive systems specifically for off-road use on uneven, soft, or unprepared ground.

Question 4

Before a crane is put into service each day, ASME B30.5 requires that the operator perform:

Accepted Answer

A frequent (daily) inspection of running ropes, hooks, and controls

Answer

ASME B30.5 requires frequent inspections — performed by the operator before each shift — covering running ropes, hooks, controls, and safety devices.

Question 5

What effect does a jib (fly section) attachment have on a crane's maximum load capacity?

Accepted Answer

It generally reduces the maximum rated capacity compared to the main boom alone

Answer

Adding a jib extension increases reach but reduces rated capacity because the extended length increases the bending moment and reduces structural margins.

(RSP) Rigger and Signal Person Certification Practice Test

(RSP) Rigger and Signal Person Certification Practice Test

RSP Crane Types & Operational Limits 2