RSO Range Inspection and Rules 3

Question 1

When inspecting a range's backstop or berm, what is the primary safety concern an RSO should evaluate?

Accepted Answer

Adequate height and density to stop all projectiles fired at the range

Answer

The backstop or berm must be of sufficient height and material density to capture all rounds fired, preventing projectiles from escaping the range.

Question 2

A shooter on the firing line has a firearm malfunction and the action cannot be opened. What is the correct RSO response?

Accepted Answer

Have the shooter lay the firearm down with the muzzle downrange and wait for RSO assistance

Answer

When a firearm cannot be cleared, it should be set down muzzle downrange and the RSO should assist, ensuring the muzzle never covers any person.

Question 3

Which condition of the range surface should an RSO flag as a hazard during a pre-session inspection?

Accepted Answer

Standing water or mud creating slippery footing on the firing line

Answer

Standing water or mud on the firing line creates a slip hazard that could cause a shooter to fall while holding a firearm, posing serious danger.

Question 4

At an outdoor range, which environmental condition should cause an RSO to suspend range operations?

Accepted Answer

A lightning storm approaching the range

Answer

An approaching lightning storm is a life-threatening weather condition that requires immediate suspension of range operations and evacuation of personnel.

Question 5

What should an RSO check about target stands or frames during a range inspection?

Accepted Answer

That they are stable, properly positioned, and will not cause bullet ricochets

Answer

Target stands must be stable enough not to tip and positioned so that missed shots or bullet fragments do not ricochet back toward the firing line.

(RSO) Certified Range Safety Officer Practice Test

(RSO) Certified Range Safety Officer Practice Test

RSO Range Inspection and Rules 3